Free TBAS Horizontal Tracking Questions and Answers

Question 1

During the Horizontal Tracking Test, which of the following best describes the primary objective?

Accepted Answer

To keep the target centered horizontally on the display

Answer

The Horizontal Tracking Test specifically assesses a pilot's ability to maintain a target's horizontal position. The primary objective is to use control inputs to keep the moving target precisely centered left-to-right on the display. This tests fine motor skills and hand-eye coordination crucial for lateral control in flight.

Question 2

What is the most important control input when performing the Horizontal Tracking Test?

Accepted Answer

Aileron deflection

Answer

In an aircraft, ailerons are the primary control surfaces used to induce roll, which in turn controls the horizontal (lateral) movement of the aircraft. Therefore, during the Horizontal Tracking Test, aileron deflection is the most important control input for keeping the target centered horizontally. Rudder pedals primarily control yaw, and elevator trim controls pitch.

Question 3

If the target moves to the right of center on the display, what corrective action should the pilot take?

Accepted Answer

Apply left aileron

Answer

If the target moves to the right of the center, the pilot needs to move the aircraft to the right to re-center it. To move an aircraft to the right, the pilot applies left aileron. This causes the aircraft to roll right, which then translates into a horizontal movement to the right, bringing the target back to the center.

Question 4

What role does hand-eye coordination play in the Horizontal Tracking Test?

Accepted Answer

It assists in tracking the target accurately

Answer

Hand-eye coordination is critical in the Horizontal Tracking Test as it allows the pilot to accurately perceive the target's position and translate that visual information into precise control inputs. This skill enables quick and correct adjustments to keep the target centered, reflecting real-world piloting demands for precise aircraft control.

Question 5

How can a pilot determine if they are overcorrecting during the Horizontal Tracking Test?

Accepted Answer

The target oscillates from left to right

Answer

Overcorrecting during the Horizontal Tracking Test is indicated when the target repeatedly moves past the center point, swinging back and forth from left to right. This oscillation suggests that the pilot is applying too much control input, causing the aircraft to continually overshoot the desired centered position. Effective tracking requires smooth, proportional adjustments.

TBAS - Test of Basic Aviation Skills Practice Test

TBAS - Test of Basic Aviation Skills Practice Test

Free TBAS Horizontal Tracking Questions and Answers