Explanation:
The Globally Harmonized System of Classification and Labeling of Chemicals, or GHS for short, was developed by the United Nations. To communicate chemical hazards to persons who handle and use the substances, this approach employs a collection of standardized pictograms, hazard statements, and precautionary statements. In order to promote international trade and the secure transfer of hazardous products between countries, the GHS also harmonizes the data contained in safety datasheets around the world.
Explanation:
The best technique to prevent the buildup of carbon monoxide from internal combustion engines is to use catalytic converters.
Explanation:
Heavy machinery can have backup alarms placed to alert personnel nearby that the machinery will be traveling in a direction with poor sight. The alarm must be audible over background noise or through hearing protection for employees.
Explanation:
Muscle, nerve, tendon, disc, joint, and cartilage diseases or ergonomic injuries are referred to as "musculoskeletal disorders" (MSD) by NIOSH. Long-term exposure to force, vibration, repetitive motion, and uncomfortable positions are all risk factors for ergonomic damage, and they are all linked to these ailments or conditions.
Explanation:
A shoring system is a cave-in prevention technique used in excavations that supports the soil using physical objects. The system, which holds back the excavation's belly to lower the risk of failure, is made up of poles, wales, sheets, and struts. Shoring is frequently employed when there is not enough room for benching or sloping.
Explanation:
Positioning device systems are employed in accordance with 29 CFR 1910.140 while carrying out duties that call for the use of both hands on a vertical surface, such as raised walls or window sills. Such systems are made up of connectors and either a body harness or a body belt.
Explanation:
Distractions draw employees' focus away from the hazards associated with the tasks they are executing. Workers become less concerned about working safety when they are focused on increasing production and moving swiftly. They may stumble, put their hands in machine power zones, evade guard systems, or otherwise put themselves in danger due to their disregard for safe work rules.
