Whetstones, also known as sharpening stones or water stones, are used for honing and sharpening the edges of blades, knives, chisels, and other cutting tools. They come in various sizes and grits, ranging from coarse to fine.
Flat files are hand tools designed for smoothing and shaping surfaces. They consist of a hardened steel bar with a flat profile, and one or both sides of the file have rows of parallel teeth or cutting edges. These teeth are what allow the file to remove material and create a smooth finish on the workpiece.
A bench grinder is a stationary power tool that is mounted on a workbench or pedestal. It consists of two grinding wheels, typically made of abrasive material, that rotate at high speeds. The grinding wheels are used for smoothing out rough edges on metal workpieces and for sharpening various tools and equipment.
A strap wrench is a versatile hand tool designed to provide a secure grip on smooth cylindrical objects, such as pipes, tubes, and fittings, without damaging their surface. It consists of a flexible strap made of strong material (usually nylon or rubber) and a handle. The strap wraps around the object to be turned, and as the handle is turned, the strap tightens around the object, providing a firm grip.
A nail punch is a small hand tool used in woodworking and carpentry to drive nails below the surface of the wood. It is used after the nail has been partially driven into the wood using a hammer. The nail punch is then placed on top of the nail head, and a few taps with the hammer drive the nail below the wood's surface.
An ammeter is a device used to measure the amount of electrical current flowing through a circuit. It is calibrated in amperes, which is the unit of measurement for electric current. Ammeters are essential tools in electrical engineering, electronics, and various fields where precise current measurements are necessary.
A felling axe is a specialized type of axe designed for felling (cutting down) trees and chopping timber. It typically has a long handle, known as the haft, and a large, sharp axe head. The axe head is shaped and weighted in a way that allows it to efficiently cut through wood fibers and facilitate the felling process.
A cutting torch is a handheld tool commonly used in metalworking and welding applications. It operates by combining oxygen and acetylene gases in a controlled manner to produce a high-temperature flame known as an oxy-acetylene flame. This flame has the capability to melt and cut through various types of metals.
A level is a basic hand tool commonly used in construction, carpentry, and various DIY projects to ensure that surfaces are flat and properly aligned. It consists of a straight, rigid body with a bubble or spirit level vial mounted on it. Inside the vial, there is a liquid (usually a colored spirit or oil) and an air bubble.
A Pipe Wrench is an adjustable wrench specifically designed to grip round objects like metal pipes or steel rods. It is one of the essential tools used by plumbers, pipefitters, and other tradespeople working with pipes.
A brace is a hand tool used for adding more torque when driving screws or manually drilling holes in wood. It is an old but still effective tool for woodworking tasks that require precision and control. Braces have a U-shaped frame with a handle at one end and a chuck at the other end where different bits can be attached.
Twist drill bits are the most common and widely used type of drill bits. They have a helical flute design, which gives them the name "twist." The flutes on the drill bit allow the chips or shavings created during drilling to be removed from the hole.
A T-Bevel is a measuring tool used to indicate or check angles on a work component. It consists of a handle and a metal blade that can be adjusted to any angle and locked in place. The T-Bevel is often used in conjunction with a protractor, which serves as the frame of reference to measure or transfer angles accurately.
