Explanation:
To identify and assess the risks involved and the methods of controlling them.
Explanation:
This is a requirement under r.14 of the EAW Regulations. However, it does not mean that live working is then 'safe'
Explanation:
110-volt reduced low voltage systems are strongly preferred for the supply of such equipment.
Explanation:
Contact with live electrical parts can be fatal. If you do not know otherwise, always assume that electrical parts are live.
Explanation:
Yellow is the usual colour of cables, socket outlets, plugs, transformers etc which are used with a 110-volt supply.
Explanation:
A transformer, usually coloured yellow, will transform 230 volts (mains voltage) down to a relatively safe 110 volts.
Explanation:
An RCD is a mechanical switching device intended to cause the opening of the contacts when the residual current attains a given value under specified conditions.
Explanation:
Machinery and accessories for lifting loads should be clearly marked to indicate their safe working loads.
Explanation:
The priority in safety is eliminating risk at source - in this case by not working in dangerous conditions - rather than trying to stay safe by using protective equipment.
Explanation:
The EAW Regulations impose duties on employers, employees, and the self-employed.
Explanation:
This is contained in HSE guidance on the Manual Handling Operations Regulations 1992.