Free CSWA Part Modeling Questions and Answers

Question 1

A cylindrical flat-bottomed hole that enlarges another coaxial hole:

Accepted Answer

Counter Bore

Answer

Explanation:
A counterbore is a cylindrical flat-bottomed hole that enlarges another coaxial hole. It typically provides a flat surface at the bottom of the hole, allowing a bolt head or screw to sit flush with the surface of the material. This feature is commonly used in engineering and manufacturing for applications where a smooth and flush surface is desired.

Question 2

A feature that creates a base or boss, a revolved cut, or a revolved surface by revolving one or more sketched profiles around a centerline:

Accepted Answer

Revolve

Answer

Explanation:
In SOLIDWORKS, the Revolve feature creates a base or boss, a revolved cut, or a revolved surface by rotating one or more sketched profiles around a centerline. This feature is commonly used to create symmetrically shaped features such as cylindrical bodies, holes, or rounded protrusions by rotating a sketch profile about an axis.

Question 3

A conical-shaped recess around a hole that is often used to receive a tapered screw:

Accepted Answer

Counter Sink

Answer

Explanation:
The Counter Sink refers to a conical-shaped recess around a hole, often used to receive a tapered screw. This feature allows the screw head to sit flush with the material surface, providing a smooth and finished appearance. Counter sinks are commonly used in various engineering and manufacturing applications for securing components together.

Question 4

A feature that linearly projects a sketch to either add material to a part (in a base or boss) or remove material from a part (in a cut or hole).

Accepted Answer

Extrusion

Answer

Explanation:
The Extrusion linearly projects a sketch to either add material to a part (in a base or boss) or remove material from a part (in a cut or hole). Extrusion is one of the fundamental features used in creating 3D solid models, allowing designers to build up geometry by extending 2D sketches into the third dimension.

Question 5

A straight line that can be used to create model geometry, features, or patterns. It can be made in a number of different ways, including using the intersection of two planes:

Accepted Answer

Axis

Answer

Explanation:
The "Axis" feature is a straight line used to create model geometry, features, or patterns. Axes can be created in various ways, including using the intersection of two planes. In SOLIDWORKS, axes are fundamental elements for defining the orientation, symmetry, and rotational behavior of features within a part model.

CSWA - Certified Solidworks Associate Practice Test

CSWA - Certified Solidworks Associate Practice Test

Free CSWA Part Modeling Questions and Answers