FREE Best Practices In Woodworking Questions and Answers

One should ____ between coatings when applying final coats.

Scrape

Wax

Sand

Stain

Correct! Wrong!

To significantly enlarge a workpiece's thickness, width, and/or length before trimming it to its ultimate proportions

Cross Cut

Rough-Cut

Back Cut

Rip Cut

Correct! Wrong!

What are the two ways to season lumber:

Rinse and repeat

Water and muck

Cutting and debarking

Both kiln and air drying

Correct! Wrong!

What coat of protection is put on wood after a stain.

Finish

Tacking cloth

320 grit sand paper

Veneer

Correct! Wrong!

Which technique for screw installation enables the screw head to be flush with the workpiece?

Countersinking

Scotching

Toenailing

Counterboring

Correct! Wrong!

The best uses for wide blades includes

Cutting circles and erratic shapes

Creating angles

Cutting straight lines

None of these

Correct! Wrong!

The wood is cut on the ______ when it is inserted into the planer.

Bottom

Rough edges

Top side

Right side

Correct! Wrong!

FREE Woodworking Safety Rules Questions and Answers
FREE Woodworking Tools And Equipment Questions and Answers

FREE Best Practices In Woodworking Questions and Answers

One should ____ between coatings when applying final coats.

To significantly enlarge a workpiece's thickness, width, and/or length before trimming it to its ultimate proportions

What are the two ways to season lumber:

What coat of protection is put on wood after a stain.

Which technique for screw installation enables the screw head to be flush with the workpiece?

The best uses for wide blades includes

The wood is cut on the ______ when it is inserted into the planer.

Related Post