Explanation:
Frank Best developed interchangeable core locks, and the most popular manufacturer of these locks is the Best Lock Corporation. These locks allow for quick and easy replacement of the lock core without disassembling the entire lock, providing convenience and security in commercial settings.
Explanation:
A rubber band can sometimes be used to bypass a chain lock by slipping it between the door and the frame and pulling the chain from the inside. This makeshift method exploits the gap between the door and the frame to disengage the chain lock.
Explanation:
A rim cylinder is typically used in deadbolt locks. These cylinders are mounted on the surface of the door rather than being installed within it, making them suitable for deadbolt applications where the lock mechanism is mounted separately from the door handle or knob.
Explanation:
The MACS (Maximum Adjacent Cut Specification) of the Titan by Kwikset is 4. This means that the difference between the largest and smallest adjacent cuts on the key should not exceed 4 units. It ensures the key's compatibility with the lock's mechanism.
Explanation:
A key-in-knob lock where a key on either side is required to operate is typically used in institutional settings such as asylums or prisons. This type of lock ensures that the door can only be opened with a key from either side, providing additional security and control over access.
Explanation:
If the entire cylinder is turning inside a car lock, it is likely due to a damaged or loose set screw. The set screw is responsible for securing the cylinder in place, and if it is damaged or loose, the cylinder may rotate freely. A broken key or a blocked key would not cause the entire cylinder to turn.
Explanation:
Most BMW vehicles usually feature a deadlocking key mechanism, which provides an additional level of security by preventing the lock from being easily picked or manipulated. Additionally, it is difficult to open a BMW vehicle lock with car opening tools due to the advanced security features and design of the locking system.
Explanation:
Mushroom and spool security pins have irregular shapes that catch in the lock cylinder, making it harder for lock pickers to manipulate the pins into the correct positions. This enhances the security of the lock.
Explanation:
In a GM 10-cut lock system, each side typically has five different depths, resulting in an even total number of cut depths. This system is commonly used in automotive locks for General Motors vehicles.
Explanation:
VATS is an acronym for Vehicle Anti Theft System, a security feature in vehicles designed to prevent unauthorized access or theft.
Explanation:
The holding force capacity of an electromagnetic lock can vary, but 1,200 pounds is a common rating for many standard models. This force is generated by an electromagnet, which holds the door securely locked until the current is interrupted, releasing the lock.
