FSC - Firearm Safety Certificate Safe Storage and Childproofing Questions and Answers 3

Question 1

What is the recommended humidity level inside a long-term gun storage safe to prevent corrosion?

Accepted Answer

Between 30% and 50% relative humidity

Answer

The recommended humidity level for firearm storage is generally between 30% and 50% relative humidity. Too high humidity causes rust and corrosion; too low can dry out wooden stocks and grips. Dehumidifier rods (electric) or silica gel desiccant canisters are commonly placed inside gun safes to maintain proper humidity levels.

Question 2

What is a "GunVault" or quick-access bedside safe, and what is its primary limitation?

Accepted Answer

A small, fast-access safe designed for one or two handguns near the bed; its primary limitation is that it offers less security against determined theft or prying than a large, heavy safe

Answer

A quick-access bedside safe (like GunVault) is designed to provide rapid authorized access to one or two handguns for home defense while preventing access by children. Its primary limitation compared to a full-size gun safe is that its smaller size and thinner steel make it more vulnerable to determined theft. For home defense purposes, the speed advantage outweighs this limitation for many owners.

Question 3

A family is going on a 2-week vacation. What is the safest storage option for their firearms?

Accepted Answer

Transfer them to a more secure full-size safe or have them stored at a licensed firearms dealer's vault facility, since the home will be unoccupied

Answer

For extended absences, upgrading to more secure storage is advisable. A stolen firearm enters the criminal pipeline immediately. Options include a heavy, full-size gun safe that is difficult to remove from the home, or temporarily storing firearms at a licensed dealer's vault facility. Quick-access safes offer minimal protection against theft when the homeowner is absent for an extended period.

Question 4

What should you do if you discover that your stored firearm has developed surface rust?

Accepted Answer

Clean the rust with appropriate bore solvent and a bronze brush, oil it properly, and inspect it for any structural damage — severe rust may require a gunsmith

Answer

Surface rust on a firearm should be cleaned with a bronze bore brush (not steel, which can scratch) and appropriate gun solvent or rust remover, then thoroughly oiled and inspected. If rust penetrates into the barrel, action, or structural components, have a gunsmith inspect it before firing. Preventive measures include proper humidity control and regular application of protective oil.

Question 5

Which of the following does California require gun dealers to provide or offer to buyers at the time of a firearm sale?

Accepted Answer

A DOJ-approved firearm safety device (such as a trigger lock) at no additional cost or at a nominal fee

Answer

California law (Penal Code Section 23635) requires that every firearm sold by a licensed dealer be accompanied by a DOJ-approved firearm safety device. Dealers are required to offer — and in many cases include — a safety device such as a trigger lock with each firearm sold. This ensures buyers immediately have the means to safely store their new firearm.

Firearm Safety Certificate (FSC) Practice Test

Firearm Safety Certificate (FSC) Practice Test

FSC - Firearm Safety Certificate Safe Storage and Childproofing Questions and Answers 3