FSC - Firearm Safety Certificate Firearm Handling and Operation Questions and Answers 3

Question 1

What is the function of the recoil spring in a semi-automatic pistol?

Accepted Answer

It absorbs rearward recoil energy when the slide cycles back and then drives the slide forward to chamber the next round and return the pistol to battery

Answer

The recoil spring wraps around the guide rod beneath the barrel. When the pistol fires, expanding gas pushes the slide rearward, compressing the recoil spring. The compressed spring then drives the slide forward, stripping a new round from the magazine, chambering it, and returning the slide to battery (forward position) for the next shot.

Question 2

What does "field stripping" a semi-automatic pistol mean?

Accepted Answer

Disassembling the pistol into its major components (slide, barrel, recoil spring, frame) for cleaning — without detail stripping to individual small parts

Answer

Field stripping is a basic disassembly of a semi-automatic pistol into its main component groups — typically slide, barrel, recoil spring/guide rod, and frame — for routine cleaning and lubrication. It does not involve removing small internal parts. Full detail stripping is more thorough but rarely needed for routine maintenance.

Question 3

Why do revolvers generally not have a manual external safety?

Accepted Answer

The long, heavy double-action trigger pull acts as the primary safety mechanism — accidental discharge requires significant deliberate trigger movement

Answer

Most double-action revolvers lack an external manual safety because the long, heavy trigger pull (typically 10-14 lbs in double action) acts as a passive safety. Accidental discharges from snags or drops are less likely because the trigger requires substantial deliberate pressure. This is also why revolvers with internal hammer (hammerless) designs are popular for pocket carry.

Question 4

What is the purpose of the thumb safety on many single-action pistols like the 1911?

Accepted Answer

It blocks the sear from releasing the hammer, preventing the pistol from firing until the safety is deliberately disengaged

Answer

The thumb safety on a 1911-style single-action pistol (and similar designs) blocks the sear — the part that holds the hammer back — from moving, which prevents the hammer from falling and firing the pistol. It must be deliberately disengaged (pushed downward by the thumb) before the pistol can fire. Single-action pistols are typically carried "cocked and locked" with the safety engaged.

Question 5

What is "trigger reset" on a semi-automatic pistol?

Accepted Answer

The point at which, after firing and allowing the trigger to move forward, the sear re-engages and the pistol is ready to fire again with the next trigger pull

Answer

After firing, the trigger must move forward enough to reset — meaning the sear re-engages the striker or hammer, preparing the pistol to fire again. Shooters can feel or hear a "click" when the trigger resets. Understanding reset allows for controlled rapid fire by releasing the trigger only as far as needed to reset, rather than fully forward, reducing split times between shots.

Firearm Safety Certificate (FSC) Practice Test

Firearm Safety Certificate (FSC) Practice Test

FSC - Firearm Safety Certificate Firearm Handling and Operation Questions and Answers 3