Forklift certification Certification Workplace Forklift 3

Question 1

What does the data plate (nameplate) on a forklift primarily tell the operator?

Accepted Answer

The rated load capacity and load center information

Answer

The data plate lists the truck's rated capacity, load center, and other specifications the operator must follow.

Question 2

The standard load center used to rate most forklift capacities is measured at:

Accepted Answer

24 inches from the face of the forks

Answer

Most forklift capacities are rated at a 24-inch load center measured from the fork face.

Question 3

What happens to a forklift's stability if the load is placed farther out on the forks than the rated load center?

Accepted Answer

Effective capacity decreases and tip-over risk rises

Answer

A load beyond the rated center shifts the center of gravity forward, reducing capacity and increasing tip-over risk.

Question 4

The 'stability triangle' of a sit-down counterbalanced forklift is formed by:

Accepted Answer

The two front wheels and the center of the rear axle

Answer

The stability triangle connects the two front wheels and the pivot point at the center of the rear (steer) axle.

Question 5

To keep the forklift stable, the combined center of gravity must remain:

Accepted Answer

Within the stability triangle

Answer

The truck stays upright only while the combined center of gravity stays inside the stability triangle.

Forklift certification Practice Test