Forklift certification Certification Forklift Pre-Operational Inspection 4

Question 1

What is the purpose of the operational (running) portion of the inspection?

Accepted Answer

To test controls, steering, and brakes with the engine on

Answer

The operational check verifies controls, steering, brakes, and lift functions work with the truck running.

Question 2

During the operational check, unusual noises or vibrations should be:

Accepted Answer

Investigated and reported

Answer

Abnormal sounds or vibrations may indicate mechanical problems that must be reported.

Question 3

Which gauge should be checked during a running inspection of an internal combustion forklift?

Accepted Answer

Engine temperature and oil pressure gauges

Answer

Temperature and oil pressure gauges confirm the engine is operating within safe ranges.

Question 4

When testing the tilt function, the mast should:

Accepted Answer

Tilt forward and backward smoothly without sticking

Answer

The tilt control should move the mast smoothly in both directions during the operational test.

Question 5

What should the operator verify about the steering during the running check?

Accepted Answer

It responds smoothly with no excessive play

Answer

Steering should respond properly without excessive looseness or difficulty turning.

Forklift certification Practice Test