Forklift certification Certification Forklift Instructions 4

Question 1

Before picking up a load, the forks should be:

Accepted Answer

Spread wide and centered under the load

Answer

Wide, centered forks fully under the load distribute weight evenly and prevent shifting.

Question 2

When placing a load on a rack, the operator should:

Accepted Answer

Approach squarely and lower gently

Answer

Approaching squarely and lowering gently prevents the load from tipping or falling.

Question 3

A load that blocks forward vision should be handled by:

Accepted Answer

Traveling in reverse

Answer

When a load blocks the view, operators should travel in reverse (except up ramps) for visibility.

Question 4

An unstable or loose load should be:

Accepted Answer

Secured or restacked before moving

Answer

Loose loads must be secured or restacked to prevent falling during transport.

Question 5

Exceeding the forklift's rated capacity can cause the truck to:

Accepted Answer

Tip forward or lose steering control

Answer

Overloading shifts weight forward, lifting rear wheels and causing tip-over or loss of steering.

Forklift certification Practice Test