Forklift certification Certification Forklift certification Safe Driving and Maneuvering 3

Question 1

If a forklift starts to tip over, the operator should:

Accepted Answer

Stay in the seat, brace, and lean away from the fall

Answer

Stay seated, hold the wheel, brace your feet, and lean away from the point of impact rather than jumping.

Question 2

When traveling without a load, the forks should be:

Accepted Answer

Lowered about 4-6 inches off the floor and tilted back

Answer

Carry forks low, roughly 4-6 inches off the floor and tilted back, for stability and clearance.

Question 3

What should an operator do when approaching a blind intersection?

Accepted Answer

Stop, sound the horn, and look both ways

Answer

Stopping, honking, and checking both directions prevents collisions at blind corners.

Question 4

Why should you avoid sudden stops and sharp turns while carrying a load?

Accepted Answer

It can cause the load to shift or the truck to tip

Answer

Abrupt maneuvers can destabilize the load or the truck, leading to tip-overs or dropped loads.

Question 5

On a wet or slippery floor, the operator should:

Accepted Answer

Reduce speed and increase stopping distance

Answer

Slippery surfaces require slower speeds and greater stopping distance to maintain control.

Forklift certification Practice Test