Forklift certification Certification Forklift certification Refueling and Recharging Procedures 2

Question 1

Before refueling a propane (LPG) forklift, what should the operator do first?

Accepted Answer

Turn off the engine and remove the key

Answer

The engine must be shut off and the ignition key removed before any fuel connection is handled.

Question 2

Where should LPG forklift refueling ideally take place?

Accepted Answer

In a well-ventilated outdoor or open area

Answer

Propane refueling should occur outdoors or in a well-ventilated area to prevent gas accumulation.

Question 3

What personal protective equipment is required when changing an LPG cylinder?

Accepted Answer

Insulated gloves and eye protection

Answer

Gloves protect against cold-burn from escaping liquid propane and eye protection guards against splash.

Question 4

After connecting a new propane cylinder, what should you check before starting?

Accepted Answer

The connection for leaks using a soapy solution or sniff test

Answer

Checking the fitting for leaks prevents a fire or explosion hazard before operation.

Question 5

Which position should the LPG cylinder relief valve point when mounted?

Accepted Answer

Upward into the vapor space

Answer

The pressure relief valve must sit in the vapor space (usually indicated by an alignment pin) to vent gas, not liquid.

Forklift certification Practice Test