Forklift certification Certification Forklift certification Pre-Operation Inspections 5

Question 1

Who is responsible for performing the pre-operation inspection of a forklift?

Accepted Answer

The trained operator assigned to the truck

Answer

The trained, authorized operator is responsible for inspecting the truck before each use.

Question 2

What is the purpose of checking the hydraulic fluid level before operation?

Accepted Answer

To ensure the truck can lift loads properly

Answer

Adequate hydraulic fluid is needed for the lift and tilt systems to function safely.

Question 3

During inspection, the tilt mechanism should be checked to ensure it:

Accepted Answer

Moves the mast forward and back smoothly and holds position

Answer

The tilt function should operate smoothly in both directions and hold the mast position without drifting.

Question 4

If lights are required for the work environment but are not functioning, the operator should:

Accepted Answer

Remove the truck from service until repaired

Answer

Required lighting is a safety feature; a truck with non-working lights should be taken out of service where lights are needed.

Question 5

What is a sign that a forklift's hydraulic cylinders may be leaking?

Accepted Answer

Oil film or drips on the cylinder rods and mast

Answer

Oil film or drips on cylinder rods indicate seal leakage that can lead to lift failure.

Forklift certification Practice Test