Forklift certification Certification Forklift certification Pre-Operation Inspections 3

Question 1

Which document is typically used to record findings of a forklift pre-operation inspection?

Accepted Answer

A daily inspection checklist

Answer

A daily inspection checklist documents that required items were checked and any defects found.

Question 2

What should be checked about the overhead guard during inspection?

Accepted Answer

That it is secure and free of cracks or damage

Answer

The overhead guard protects the operator from falling objects and must be intact and securely attached.

Question 3

An operator notices the seat belt is frayed and won't latch. The correct action is to:

Accepted Answer

Remove the truck from service until repaired

Answer

A defective seat belt is a safety hazard and the truck must not be used until it is repaired.

Question 4

When checking the mast and lift chains, the operator is looking for:

Accepted Answer

Proper lubrication, and no kinks, wear, or damage

Answer

Lift chains should be properly lubricated and free of kinks, wear, or damage to lift loads safely.

Question 5

Which of the following is part of the operational (engine-on) portion of the inspection?

Accepted Answer

Testing the brakes, steering, and lift controls

Answer

With the engine running, the operator tests functional systems like brakes, steering, horn, lights, and lift controls.

Forklift certification Practice Test