Forklift certification Certification Forklift certification Pre-Operation Inspections 2

Question 1

When must a pre-operation inspection of a forklift be performed?

Accepted Answer

At the start of each shift before use

Answer

OSHA requires a forklift to be examined at least daily, or before each shift when used around the clock.

Question 2

During a pre-shift check, a leaking hydraulic hose is discovered. What should the operator do?

Accepted Answer

Tag the truck out of service and report it

Answer

A leaking hydraulic line is a defect that makes the truck unsafe, so it must be removed from service until repaired.

Question 3

Which part of the pre-operation inspection is done with the engine OFF?

Accepted Answer

Checking fluid levels and tires

Answer

Visual checks like fluid levels, tires, forks, and leaks are performed during the engine-off portion of the inspection.

Question 4

What condition of the forks would make a forklift unsafe to operate?

Accepted Answer

Visible cracks or bends

Answer

Cracks, bends, or excessive wear on the forks compromise load capacity and safety.

Question 5

Why should the operator check tire condition before use?

Accepted Answer

Because worn or damaged tires affect stability and traction

Answer

Damaged or worn tires reduce stability and can lead to tip-overs or loss of control.

Forklift certification Practice Test