Forklift certification Certification Forklift certification Load Handling and Stability 4

Question 1

What does a forklift's data plate (nameplate) tell the operator about load handling?

Accepted Answer

The rated capacity at a specified load center and mast height

Answer

The data plate lists rated capacity for a given load center and lift height, which the operator must not exceed.

Question 2

When picking up a palletized load, how far should the forks enter the pallet?

Accepted Answer

Fully, until the pallet is against the fork backrest

Answer

Forks should be inserted all the way so the load rests against the backrest for maximum stability.

Question 3

Making a turn while carrying a raised load is dangerous mainly because it can cause what?

Accepted Answer

A lateral (sideways) tip-over

Answer

Turning shifts the center of gravity sideways and, with a raised load, can cause the truck to roll over.

Question 4

Why is it unsafe to add extra counterweight not approved by the manufacturer?

Accepted Answer

It alters rated stability and can damage the truck or cause loss of control

Answer

Unauthorized counterweight changes the engineered balance and can make the truck unsafe.

Question 5

When stacking a load on a high rack, what should you do once the load is positioned?

Accepted Answer

Level the forks and back straight out slowly

Answer

After placing the load, level the forks, withdraw them straight and slowly to avoid disturbing the stack.

Forklift certification Practice Test