MRI - Magnetic Resonance Imaging Practice Test

โ–ถ

If you searched for Kadlec MRI, you are probably preparing for a scan in the Tri-Cities area of Washington and want to know what to expect. Kadlec Regional Medical Center in Richland is a major hospital system, and like most large hospitals it offers magnetic resonance imaging as part of its diagnostic services. Many patients also ask about an open MRI machine, especially if tight spaces make them anxious. This guide explains how MRI works, which scanner types exist, and how to choose.

If you searched for Kadlec MRI, you are probably preparing for a scan in the Tri-Cities area of Washington and want to know what to expect. Kadlec Regional Medical Center in Richland is a major hospital system, and like most large hospitals it offers magnetic resonance imaging as part of its diagnostic services. Many patients also ask about an open MRI machine, especially if tight spaces make them anxious. This guide explains how MRI works, which scanner types exist, and how to choose. Practice with the free MRI - Magnetic Resonance Imaging practice test on PracticeTestGeeks (11 questions with answer explanations).

Kadlec MRI services are delivered through a hospital imaging department staffed by registered technologists and radiologists. The exact scanners, hours, and specialty protocols can change, so always confirm details with the scheduling office before you travel. What does not change is the physics: a strong magnet, radio waves, and computer reconstruction produce detailed pictures of soft tissue without ionizing radiation, which makes MRI a first-choice study for many brain, spine, joint, and pelvic questions.

People often compare health systems when choosing where to scan. A Kaiser MRI, for example, happens inside an integrated plan, while a hospital like Kadlec serves patients from many insurers. If you want a deeper comparison of modalities and what each patient experience looks like, our kaiser mri resource explains how CT and MRI differ, when each is ordered, and what to expect on the day of the exam.

An open MRI machine uses a wider or partially open magnet design instead of the long narrow tube many people picture. Some units have two flat magnet plates with open sides, while wide-bore scanners keep a tunnel but enlarge it to about 70 centimeters. Both options reduce the closed-in feeling. Claustrophobic patients, larger patients, and children who need a parent nearby often tolerate these designs far better than a conventional scanner.

Open designs carry a tradeoff. Many older open scanners run at lower field strengths, roughly 0.2 to 1.2 tesla, compared with 1.5 or 3 tesla in standard closed units. Lower field strength can mean longer scan times or slightly less detail for small structures. Modern wide-bore 1.5T systems narrow that gap, so your ordering provider may recommend one of them for body imaging instead of a true open magnet.

Billing and coding also matter. Every MRI order carries a CPT code that tells the hospital and insurer exactly what was done. A pelvic MRI, for instance, uses code 72195, 72196, or 72197, depending on contrast. Knowing the code before your appointment helps you request accurate price estimates and understand any prior authorization your insurance requires, which prevents surprise bills after the exam is finished and the radiology report is already in your chart.

Below you will find a step-by-step preparation timeline, a breakdown of open bore options, pros and cons, a checklist, and practical tips. Treat this page as general education rather than medical advice. Your physician and the imaging facility decide which scanner suits your body, your implant status, and your diagnosis. Use the practice quizzes along the way if you are studying MRI as a student or aspiring technologist preparing for registry exams.

Free MRI - Magnetic Resonance Imaging Study Tools

Interactive MRI - Magnetic Resonance Imaging resources on PracticeTestGeeks, free to start:

Kadlec MRI and Open MRI by the Numbers

๐Ÿ“
70 cm
Wide-Bore Opening
๐Ÿงฒ
0.2โ€“1.2T
Typical Open MRI Field Strength
โฑ๏ธ
30โ€“60 min
Typical Scan Time
๐Ÿ“‹
3
Pelvic MRI CPT Codes
๐Ÿ›ก๏ธ
0
Ionizing Radiation
Test Your Kadlec MRI Knowledge With Free Practice Questions

Step-by-Step MRI Preparation Timeline

๐Ÿ“‹

Ask your provider why the MRI is needed and whether an open or wide-bore scanner is acceptable. Request the CPT code on the order so the facility and your insurer are working from the same information.

๐Ÿ”Ž

Many insurers require approval before advanced imaging. Call the imaging department and your plan to verify authorization, in-network status, and your expected deductible or copay before the appointment date arrives.

๐Ÿ›ก๏ธ

Fill out the MRI safety questionnaire honestly. List pacemakers, aneurysm clips, cochlear implants, metal fragments, tattoos, and prior surgeries. Bring implant cards, since the technologist must confirm that each device is MR conditional.

๐Ÿ‘•

Wear comfortable clothing without metal. Follow any fasting rules, especially for abdominal or pelvic studies. Leave jewelry, watches, and phones in a locker, and arrive early so paperwork does not delay your slot.

โœ…

Hold still, use the call button if needed, and ask for earplugs or headphones. A radiologist reads the images, and the report goes to your provider, who then reviews the findings with you.

CPT codes, short for Current Procedural Terminology, are the five-digit numbers used to describe medical services. For a pelvic MRI, the three main codes are 72195 for an exam without contrast, 72196 for an exam with contrast, and 72197 for an exam without contrast followed by contrast. The right pelvic MRI CPT code depends on what the radiologist actually performs, so it may differ from what was first ordered.

Code 72197 is the one most people mean when they search for MRI pelvis w wo gyn CPT. It covers imaging before and after an intravenous gadolinium-based contrast agent, and it is commonly used to evaluate gynecologic concerns such as fibroids, endometriosis, adnexal masses, and staging of cervical or endometrial cancers. Because it includes two imaging phases, it usually takes longer and costs more than 72195.

Code 72195 is used when contrast is not needed or not safe. Examples include screening for structural questions, evaluating pelvic pain with a suspected non-enhancing cause, or imaging patients with significantly reduced kidney function. Many facilities also use it for hip and bladder assessments, although some joint studies are billed under separate lower-extremity codes. Always ask which code applies to your specific exam.

Code 72196 covers contrast-only imaging, and it is used far less often. Most radiology protocols compare pictures before and after contrast, which is exactly why 72197 dominates in practice. If your insurance letter lists 72196 but your doctor told you to expect pre- and post-contrast images, call the scheduler to correct the order. A mismatch between ordered and performed codes is a common reason for claim denials.

Gynecologic pelvic MRI differs from a male pelvic or prostate study, even though the base codes can overlap. Prostate protocols often add multiparametric sequences, and some facilities use an endorectal coil. Orders for obstetric imaging use different codes entirely. When you search for pricing, include the specific indication, not just the words pelvic MRI, so the quote reflects the real protocol your radiologist will use.

Contrast adds separate billing lines. The gadolinium agent itself is often billed with a supply or drug code, and facilities may add a technical fee for the scanner and a professional fee for the radiologist reading the study. That is why two bills for the same pelvic MRI can look different. Request an itemized estimate that lists the technical, professional, and contrast components before you schedule.

Coding knowledge helps you advocate for yourself, and it is also tested knowledge for students entering the field. Technologists learn how protocols map to procedures, while billing staff learn how documentation supports each code. For deeper reading on machine families and how coding connects to hardware, see our related guide on GE 1.5T systems, where pelvic imaging protocols and open bore options are discussed in detail.

Free MRI Knowledge Questions and Answers
Check your understanding of MRI basics, safety, and patient care with free practice questions.
Free MRI Physics Questions and Answers
Practice magnet strength, relaxation, gradients, and pulse sequence concepts with instant free feedback.

Open Bore MRI Locations and the Closest Open MRI to My Location

๐Ÿ“‹ Finding Open Bore Locations

Open bore MRI locations are listed by hospital systems, outpatient imaging chains, and independent radiology centers. Start with your insurer's provider directory and filter for MRI, then call each site and ask three questions: is the scanner open or wide-bore, what is the field strength, and what is the maximum patient weight. Websites often say open when they mean wide-bore, so confirm the details by phone.

Hospital departments, including those at regional centers like Kadlec in Richland, may offer wide-bore units even when they do not market a traditional open design. Ask the imaging scheduler directly about bore diameter and table weight limits. If the hospital cannot accommodate your needs, request a referral to a nearby outpatient center that does, and have your provider update the order accordingly.

๐Ÿ“‹ Closest Open MRI to My Location

To find the closest open MRI to your location, use a map search for open MRI near me, then compare results against your insurance network. Distance matters less than fit: a scanner twenty minutes farther away that matches your body and diagnosis may be worth the drive. Check recent reviews for comments about staff patience, wait times, and whether anxious patients felt supported.

In smaller markets like the Tri-Cities, the nearest open option may be a wide-bore system rather than a true open magnet, and you may need to travel to a larger metro area for a true open design. Call ahead, ask about appointment lead times, and ask whether weekend or evening slots exist. Flexible hours can shorten your wait considerably.

๐Ÿ“‹ Questions to Ask Before Booking

Before booking, ask whether the facility can perform the exact exam your provider ordered on its open or wide-bore unit. Some studies, such as detailed pelvic, cardiac, or small-joint imaging, need higher field strength and specialized coils. Also ask about the technologist's experience with anxious patients, whether a support person may stay in the room, and what comfort measures such as mirrors, music, or eye covers are offered.

Confirm the cost in writing. Request the CPT code, the facility fee, the radiologist's reading fee, and any contrast charge. Ask whether self-pay or cash discounts exist if your deductible is high. Finally, ask how soon results reach your provider, since a fast open scan is less helpful if the report takes a week to arrive.

Is an Open MRI Machine Better Than a Closed MRI?

Pros

  • Reduces the closed-in feeling for claustrophobic patients
  • Accommodates larger patients and wider body frames more comfortably
  • Allows a parent or support person to stay close to a child
  • May reduce the need for sedation or anti-anxiety medication
  • Often quieter and less intimidating than a narrow tunnel
  • Lets patients with painful positioning needs move slightly more freely

Cons

  • Lower field strength on many true open units can reduce image detail
  • Scans may take longer, which increases motion artifact risk
  • Fewer facilities offer true open magnets, so travel may be required
  • Some advanced protocols are not available on lower-field scanners
  • Small lesions can be harder to detect than on 1.5T or 3T systems
  • Cost and insurance approval can differ from standard scanners

Pros and Cons at a Glance

ProsCons
Reduces the closed-in feeling for claustrophobic patientsLower field strength on many true open units can reduce image detail
Accommodates larger patients and wider body frames more comfortablyScans may take longer, which increases motion artifact risk
Allows a parent or support person to stay close to a childFewer facilities offer true open magnets, so travel may be required
May reduce the need for sedation or anti-anxiety medicationSome advanced protocols are not available on lower-field scanners
Often quieter and less intimidating than a narrow tunnelCost and insurance approval can differ from standard scanners
Free MRI Registry Questions and Answers
Prepare for the ARRT MRI registry with free questions covering safety, procedures, and imaging.
MRI Data Acquisition, k-Space and Image Processing/Storage
Review k-space filling, data acquisition, image reconstruction, and storage concepts with focused practice.

Open MRI Machine Checklist Before Your Kadlec MRI

Ask your provider whether an open or wide-bore scanner suits your exam.
Confirm the CPT code on your order, such as 72195 or 72197.
Call your insurer to verify prior authorization and in-network status.
Request an itemized cost estimate for facility, reading, and contrast fees.
List every implant, device, and prior surgery on the safety form.
Bring implant cards and a photo ID to the appointment.
Wear metal-free clothing and leave jewelry at home.
Follow fasting or hydration instructions exactly as given.
Arrive fifteen minutes early to complete paperwork calmly.
Ask the technologist about earplugs, headphones, and the call button.
Open does not always mean better for your exam

A wide-bore 1.5T scanner often gives the comfort of extra room with the image quality of a standard magnet. Ask your provider whether that option exists before assuming you need a true low-field open unit.

Every MRI scanner relies on a powerful static magnetic field, gradient coils that vary the field across the body, and radiofrequency coils that send and receive signals. Hydrogen protons in water and fat align with the main field. A radiofrequency pulse knocks them out of alignment, and as they relax, they emit signals that the computer converts into images. Open and closed scanners share this physics but package the magnet differently.

In a traditional closed scanner, a superconducting solenoid magnet surrounds the patient in a long cylinder, producing a highly uniform field. This uniformity supports fast sequences and fine detail. Many open designs instead place magnets above and below the patient, often using permanent or resistive magnets at lower field strengths. The open geometry leaves the sides free, which is why patients feel less enclosed, but the field is typically weaker.

Field strength affects signal-to-noise ratio, the measure of how much useful signal stands out from background noise. Higher fields produce more signal, which can be traded for thinner slices, faster scans, or better resolution. At lower fields, technologists compensate with longer acquisitions or more signal averaging. That is why a knee study on an open unit may take longer than one on a 1.5T scanner, yet remain diagnostic.

Wide-bore scanners are a middle path. They use superconducting magnets at 1.5T or 3T but widen the tunnel to about 70 centimeters and shorten its length. Patients gain headroom and a more open view, while radiologists retain strong signal and access to advanced sequences. For many hospital departments, wide-bore systems now serve as the practical answer to patients who ask for an open MRI machine.

Image quality also depends on coils, positioning, and patient motion. Dedicated surface coils placed close to the area of interest raise signal quality dramatically. Breath-holding for abdominal studies, immobilization for spine studies, and clear communication throughout the exam all reduce blur. A comfortable patient moves less, so a well-chosen scanner can improve diagnostic value even when its raw field strength is lower.

Safety rules apply to every scanner type. The magnet is always on, so ferromagnetic objects can become projectiles, and implants may heat or move. Technologists screen each patient and every person who enters the scanner room. MR conditional devices have specific field strength and scan setting limits, so an implant approved for 1.5T may not be cleared for 3T, and lower-field open units follow their own labeling.

For students, understanding these differences builds a foundation for registry exams. Questions often ask how field strength changes signal, why gradients enable spatial encoding, and which hazards are linked to which scanner components. Reviewing the physics behind open and closed designs helps you explain choices to patients clearly and confidently, a skill that distinguishes strong technologists from those who only memorize protocols.

Cost is one of the biggest concerns for patients who search for a Kadlec MRI. Hospital-based scans often cost more than those at freestanding outpatient imaging centers because of facility fees. A pelvic MRI can range from a few hundred dollars at a discount center to several thousand dollars at a hospital before insurance. Ask for a price estimate in advance, and compare at least two facilities.

Insurance usually covers medically necessary MRI when the order and documentation support the diagnosis. Your cost depends on your deductible, copay, and coinsurance. If you have not met your deductible, you may pay the entire negotiated rate. Ask whether the facility is in network, because out-of-network imaging can cost far more even if the technology and radiologist are identical to an in-network option.

Prior authorization is the step that trips up many patients. Your provider's office typically submits the request with clinical notes and the CPT code, and the insurer approves or denies it. Approval is not a guarantee of payment, but it greatly lowers the risk of denial. Keep the authorization number, confirm the approved facility and date range, and ask the scheduler to match it.

If your claim is denied, do not give up. Ask for the written reason, then request an appeal with supporting notes from your provider. Common denial causes include a code mismatch, missing authorization, or an out-of-network facility. Correcting the code or adding clinical detail often resolves the issue. Appeals have deadlines, so act quickly and document each phone call with the date and representative name.

Patients without insurance still have options. Many hospitals offer financial assistance programs, charity care, or prompt-pay discounts for cash patients. Outpatient imaging centers often post transparent self-pay prices. Federal price transparency rules require hospitals to publish standard charges, so you can look up your exam by code. Asking directly for a self-pay quote frequently produces a lower number than the listed chargemaster rate.

Scheduling is easier when you are flexible. Early morning and late evening slots often open sooner, and cancellations can move you up the list. If you need an open or wide-bore scanner, mention it during the first call so the scheduler can book the right machine. Booking the wrong scanner means rescheduling, which delays diagnosis and can cost you another authorization cycle.

Whether you scan at a hospital like Kadlec, a Kaiser facility, or an independent center, the process follows the same pattern: order, authorization, screening, scan, and report. Understanding each step and its coding reduces stress and cost. If you want more detail on side effects and safety, our guide on MRI risks and open bore options covers pelvic MRI CPT codes alongside patient safety topics.

Sharpen Your Open MRI Machine Physics With Free Practice

Start your preparation by writing down your questions and bringing them to the appointment. Good questions include why the scan is needed, whether contrast will be used, how long you will be in the scanner, and when results will be available. Having these answers reduces anxiety and helps you stay still, which directly improves image quality and may shorten your total time on the table.

If you feel anxious in enclosed spaces, tell the technologist before the scan begins rather than during it. Staff can offer a mirror, a blanket, music, or a mask to cover your eyes. Some patients practice slow breathing in the days before the exam. Others ask a provider about a mild anti-anxiety medication, in which case you will need a driver for the trip home.

Plan your day around the appointment. Eat and hydrate according to instructions, use the restroom before you arrive, and wear loose clothing with no metal zippers or underwire. Many facilities provide a gown, but metal-free athletic wear sometimes works. Leave valuables at home. Credit cards, hearing aids, and phones can be damaged by the magnetic field, so lockers are provided for safekeeping.

During the scan, expect loud knocking, buzzing, and thumping noises. These come from the gradient coils switching rapidly and are normal. Earplugs or headphones reduce the noise to a comfortable level. The table may move slightly between sequences. You will have a call button or squeeze ball in hand, and the technologist can hear and speak with you through an intercom at any time.

Hold as still as possible, especially during sequences the technologist identifies as sensitive to motion. For abdominal and pelvic studies, you may be asked to hold your breath for ten to twenty seconds at a time. If you need to cough or shift, wait for a pause between sequences when possible. A repeated sequence adds time, so staying relaxed saves minutes.

After the scan, you can usually resume normal activity right away unless you received sedation. If you had contrast, drink water and follow any instructions about kidney function. Report unusual symptoms such as hives, swelling, or persistent headache to the facility. Results typically reach your provider within a few days, and you should schedule a follow-up visit rather than assuming no news is good news.

Finally, if you are studying MRI as a career path, use practice questions to build confidence in safety, physics, and anatomy. Short daily quizzes beat rare marathon sessions, because spaced repetition improves retention. Review missed questions, write brief explanations in your own words, and revisit weak topics weekly. Strong preparation helps both exam candidates and patients, since informed people communicate better and feel more in control.

MRI MRI Anatomy and Pathology 1
Practice identifying anatomy and common pathology on MRI with structured review questions.
MRI MRI Anatomy and Pathology 2
Continue anatomy and pathology review with more advanced MRI image interpretation questions.

Sample MRI - Magnetic Resonance Imaging Practice Questions

Try these questions from our free MRI - Magnetic Resonance Imaging practice tests. The correct answer and an explanation follow each question.

  1. When imaging the lumbar spine, which position best opens the intervertebral foramina and reduces lumbar lordosis for improved visualization?

    • A. Prone with legs extended
    • B. Supine with legs elevated on a cushion (knees and hips flexed)
    • C. Lateral decubitus
    • D. Prone with pillow under abdomen

    Answer: B. Supine with legs elevated on a cushion (knees and hips flexed)

    Flexing the hips and knees while supine flattens lumbar lordosis, opens intervertebral foramina, and improves disc and nerve root visualization.

  2. Gadolinium retention in the brain has been observed particularly in which structure on unenhanced T1-weighted images in patients receiving multiple GBCA doses?

    • A. Hippocampus
    • B. Dentate nucleus of the cerebellum
    • C. Thalamus
    • D. Caudate nucleus

    Answer: B. Dentate nucleus of the cerebellum

    Gadolinium deposition in the dentate nucleus and globus pallidus manifests as T1 hyperintensity on unenhanced brain MRI after multiple GBCA administrations.

  3. Which sequence parameter directly controls the slice thickness in a 2D spin-echo acquisition?

    • A. Bandwidth of the readout gradient
    • B. Bandwidth of the RF pulse divided by the slice-select gradient amplitude
    • C. TE duration
    • D. TR duration

    Answer: B. Bandwidth of the RF pulse divided by the slice-select gradient amplitude

    Slice thickness = RF pulse bandwidth รท slice-select gradient amplitude; thicker slices can be produced by widening the RF bandwidth or reducing the gradient strength.

  4. The quantity of determines the receiver bandwidth.

    • A. Frequency samples in the matrix
    • B. Phase changes within the matrix

    Answer: A. Frequency samples in the matrix

    The receiver bandwidth in MRI is directly determined by the number of frequency samples (pixels) in the frequency encoding direction. A higher number of samples requires a wider bandwidth to accurately capture the range of frequencies present in the signal within the acquisition time. This ensures proper spatial resolution and minimizes aliasing artifacts in the resulting image.

Take the full MRI - Magnetic Resonance Imaging practice test

MRI Questions and Answers

Does Kadlec offer MRI services?

Kadlec Regional Medical Center in Richland, Washington, is a full-service hospital with diagnostic imaging, and MRI is typically part of that department. Scanner types, hours, and available protocols can change, so call the Kadlec imaging scheduling office to confirm that your specific exam is offered and whether a wide-bore scanner is available.

What is an open MRI machine?

An open MRI machine uses a magnet design that leaves the sides open or provides a much wider tunnel than a standard scanner. It is meant to reduce the closed-in feeling. True open units often run at lower field strength, while wide-bore systems keep a tunnel of about 70 centimeters at 1.5T or 3T.

What is the CPT code for a pelvic MRI?

Pelvic MRI uses three main CPT codes: 72195 for without contrast, 72196 for with contrast, and 72197 for without contrast followed by contrast. The code that is billed depends on what the radiologist performs. Confirm the code on your order with the scheduler and your insurance company.

What is the CPT code for MRI pelvis with and without contrast for gynecologic concerns?

A pelvic MRI performed before and after contrast, including exams for gynecologic concerns such as fibroids or masses, is generally billed under CPT 72197. Coding rules can vary by payer and protocol, so ask the facility to confirm the exact code and any separate contrast or supply charges.

Are open MRI scans as accurate as closed MRI scans?

Accuracy depends on the exam. Wide-bore 1.5T and 3T scanners produce image quality comparable to standard units. Lower-field true open magnets may show less detail for small structures and take longer. Your provider and radiologist can tell you whether an open scanner is suitable for your diagnosis.

How do I find open bore MRI locations near me?

Search your insurance provider directory for MRI facilities, then call each one and ask whether the scanner is open or wide-bore, its field strength, and weight limits. Map searches for open MRI near me are a good start, but phone confirmation is essential because marketing terms are often used loosely.

How long does a pelvic MRI take?

A pelvic MRI typically takes between 30 and 60 minutes, depending on the protocol and whether contrast is used. Exams coded 72197 take longer because images are acquired before and after contrast. Arrive early for screening and paperwork, as total time at the facility is often longer than scan time.

Can claustrophobic patients have an MRI?

Yes. Many claustrophobic patients complete MRI successfully with preparation. Options include wide-bore or open scanners, a mirror or eye mask, music, breathing techniques, a support person, or mild medication prescribed by a provider. Tell the technologist about your concerns before the scan so they can adjust the approach.

Is MRI safe with metal implants?

It depends on the implant. Many modern devices are MR conditional and safe under specific conditions, while others are unsafe. Always tell the scheduler about pacemakers, aneurysm clips, cochlear implants, and any metal fragments. Bring device cards so the safety team can verify field strength limits before you are scanned.

Will insurance cover my MRI?

Insurance generally covers medically necessary MRI, but coverage depends on your plan, deductible, and authorization requirements. Ask your provider's office to submit prior authorization, confirm that the facility is in network, and request the CPT code. Keep your authorization number, and appeal promptly if a claim is denied.
โ–ถ Start Quiz