Forklift certification Certification Forklift Pre-Operational Inspection 2

Question 1

When should a forklift pre-operational inspection be performed?

Accepted Answer

At the start of each shift before use

Answer

OSHA requires forklifts to be inspected at least daily, or after each shift when used around the clock.

Question 2

What should you do if you find a defect during the pre-operational inspection?

Accepted Answer

Tag it out of service and report it

Answer

A defective forklift must be removed from service and reported until it is repaired.

Question 3

Which fluid level is NOT typically checked during a forklift inspection?

Accepted Answer

Windshield washer fluid

Answer

Most industrial forklifts have no windshield, so washer fluid is not part of the inspection.

Question 4

During the inspection, what indicates a possible hydraulic leak?

Accepted Answer

Wet or oily spots under the mast

Answer

Puddles or oily residue under the mast or cylinders signal a hydraulic leak needing attention.

Question 5

What part of the inspection ensures the operator can safely stop the forklift?

Accepted Answer

Service and parking brake test

Answer

Testing both the service brake and parking brake confirms the truck can stop and hold safely.

Forklift certification Practice Test