MSF Pre-Ride Inspection (T-CLOCS) 2

Question 1

In the T-CLOCS acronym, what does the first 'C' stand for?

Accepted Answer

Controls

Answer

The first 'C' in T-CLOCS stands for Controls, which includes throttle, brakes, levers, pedals, and cables.

Question 2

When inspecting brake levers and pedals during a T-CLOCS check, what should you verify?

Accepted Answer

They feel firm and return to position after use

Answer

Brake levers and pedals should feel firm and spring back to their original position, indicating the hydraulic or cable system is functioning properly.

Question 3

During the 'O' (Oil and other fluids) check, which fluid level is checked via a sight glass or dipstick on most motorcycles?

Accepted Answer

Engine oil

Answer

Engine oil is typically checked via a sight glass on the engine case or a dipstick, and must be within the manufacturer's recommended range.

Question 4

What does the 'S' in T-CLOCS stand for?

Accepted Answer

Stands

Answer

The 'S' in T-CLOCS stands for Stands, covering the side stand and center stand condition and function.

Question 5

When checking the throttle during a pre-ride inspection, you should verify that it:

Accepted Answer

Snaps back freely when released and is smooth in all handlebar positions

Answer

A properly functioning throttle snaps back to closed position immediately upon release and operates smoothly throughout the full range of handlebar movement.

MSF - Motorcycle Safety Foundation Practice Test

MSF - Motorcycle Safety Foundation Practice Test

MSF Pre-Ride Inspection (T-CLOCS) 2