Chauffeur License Evaluation Process 2

Question 1

During the chauffeur license road test, what must you do before pulling away from the curb?

Accepted Answer

Signal, check mirrors, then check blind spots

Answer

Before pulling from a curb, you must signal your intent, check mirrors, and check blind spots for cyclists or pedestrians.

Question 2

If an examiner tells you to 'make a legal U-turn when safe' and you cannot find a safe location, what should you do?

Accepted Answer

Continue driving until a safe, legal location is found

Answer

You should continue until you find a location where a U-turn is both legal and safe rather than rushing the maneuver.

Question 3

What is the primary purpose of the pre-trip vehicle inspection portion of a chauffeur evaluation?

Accepted Answer

To confirm the vehicle is mechanically safe and roadworthy before operation

Answer

The pre-trip inspection verifies brakes, lights, tires, and other safety systems are functioning before the driver takes passengers.

Question 4

An examiner marks a 'critical error' during your road test. What does this typically result in?

Accepted Answer

Immediate test failure regardless of overall performance

Answer

Critical errors such as running a red light or requiring the examiner to intervene result in automatic test failure.

Question 5

During a chauffeur evaluation, how should you handle a railroad crossing with a flashing signal?

Accepted Answer

Stop completely, look both ways, and proceed only when safe

Answer

A flashing red signal at a railroad crossing requires a full stop, visual check, and confirmation it is clear before crossing.

CDL Practice Test