CDL School Bus Endorsement 2

Question 1

How far in advance should a school bus driver activate the amber warning lights before stopping to load or unload students?

Accepted Answer

At least 100 to 300 feet, depending on speed and state law

Answer

Amber lights warn following traffic of an upcoming stop and should be activated roughly 100 to 300 feet ahead depending on speed and state requirements.

Question 2

What is the most dangerous area around a school bus where students are at greatest risk?

Accepted Answer

The danger zone within 10 feet around the bus

Answer

The danger zone extends about 10 feet around the bus where the driver may not be able to see students.

Question 3

When must a school bus driver use red flashing lights and the stop arm?

Accepted Answer

When stopped to load or unload students

Answer

Red flashing lights and the stop arm are used when the bus is stopped to load or unload passengers.

Question 4

If a student drops something near the bus while exiting, what should the driver instruct them to do?

Accepted Answer

Leave it and move to a safe spot, never reach under the bus

Answer

Students should never retrieve dropped items near the bus; they should tell the driver and stay clear of the danger zone.

Question 5

During a pre-trip inspection of a school bus, the stop arm and warning lights should be checked for what?

Accepted Answer

Proper operation and that lenses are clean and unbroken

Answer

Warning lights and the stop arm must operate properly with clean, intact lenses to be visible to traffic.

CDL Practice Test

CDL Practice Test

CDL School Bus Endorsement 2