TLILIC0003 TLILIC0003 Forklift Safety and Operations

Question 1

Before operating a forklift, which pre-operational check must you complete first?

Accepted Answer

Review the logbook for previous faults

Answer

Reviewing the logbook for previously recorded faults is the first step so you are aware of any outstanding issues before conducting your own physical checks.

Question 2

What does the rated capacity of a forklift refer to?

Accepted Answer

The maximum weight the forklift can carry at the manufacturer's specified load centre

Answer

Rated capacity is the maximum load a forklift can safely carry at the manufacturer's specified load centre distance, typically 500 mm from the face of the forks.

Question 3

A forklift has a rated capacity of 2,000 kg at a 500 mm load centre. If the load centre increases to 750 mm, what happens to the safe carrying capacity?

Accepted Answer

It decreases

Answer

As the load centre increases beyond the rated distance, the safe carrying capacity decreases due to the increased moment (torque) acting on the forklift.

Question 4

Which of the following forms the forklift's stability triangle?

Accepted Answer

The two front wheels and the rear axle pivot point

Answer

The stability triangle is formed by the two front drive wheels and the single pivot point at the centre of the rear axle, creating a triangular base of support.

Question 5

Under the Work Health and Safety (WHS) Act, what duty does a forklift operator have regarding hazards in the workplace?

Accepted Answer

Take reasonable care to identify hazards and report them to the person conducting the business or undertaking (PCBU)

Answer

Under the WHS Act, workers have a duty to take reasonable care for their own and others' health and safety, which includes identifying and reporting hazards to the PCBU.

Forklift Licence Practice Test

Forklift Licence Practice Test

TLILIC0003 TLILIC0003 Forklift Safety and Operations