S95 Codes and Standards 3

Question 1

According to NFPA 72 Table 14.4.5, spot-type smoke detectors installed in non-air-duct areas must be functionally tested at what minimum frequency?

Accepted Answer

Annually

Answer

NFPA 72 requires functional testing of spot-type smoke detectors at least annually as part of the system's inspection, testing, and maintenance program.

Question 2

Under NFPA 72, sealed lead-acid (SLA) batteries used in fire alarm systems must be replaced at a maximum interval of:

Accepted Answer

Every 5 years

Answer

NFPA 72 requires sealed lead-acid batteries to be replaced at intervals not exceeding 5 years, regardless of their apparent condition.

Question 3

NFPA 72 stipulates that inspection, testing, and maintenance of fire alarm systems must be performed by:

Accepted Answer

Qualified personnel whose training and competence satisfy the AHJ

Answer

NFPA 72 requires qualified personnel acceptable to the AHJ, and while NICET certification is widely accepted, the code does not mandate a specific credential.

Question 4

According to NFPA 72, which of the following must be documented on every fire alarm system inspection and test record?

Accepted Answer

Date, name of inspector, and results of all inspections and tests performed

Answer

NFPA 72 Section 7.8.2 requires inspection records to include the date, the inspector's identity, and the results of all tests performed.

Question 5

Under NFPA 72 Table 14.4.5, manual fire alarm pull stations must be tested at what frequency?

Accepted Answer

Annually

Answer

NFPA 72 requires manual pull stations to be tested annually as part of the required inspection, testing, and maintenance program.

(S95) Supervision of Fire Alarm System Practice Test

(S95) Supervision of Fire Alarm System Practice Test

S95 Codes and Standards 3