General Contractor License Construction Safety and OSHA 5

Question 1

What action is required when a worker discovers an unguarded floor opening or hole on a construction site?

Accepted Answer

Immediately cover or guard it and warn others

Answer

Floor holes and openings must be immediately covered or guarded to prevent fall hazards under OSHA's fall protection standards.

Question 2

What is the required angle (slope) for a ladder to be safely positioned under OSHA standards?

Accepted Answer

1:4 (one unit out for every 4 units up)

Answer

OSHA requires portable ladders to be positioned at a 1:4 ratio — one foot out from the base for every four feet of height.

Question 3

What is the purpose of a 'toolbox talk' (also called a tailgate meeting) in construction safety?

Accepted Answer

To provide brief, job-specific safety training before work begins

Answer

Toolbox talks are short, informal safety meetings held before work begins to address specific hazards workers will encounter that day.

Question 4

Under OSHA, which type of respirator provides the highest level of respiratory protection?

Accepted Answer

Self-contained breathing apparatus (SCBA)

Answer

SCBA provides the highest protection level because it supplies breathable air from a portable tank, independent of the surrounding atmosphere.

Question 5

How must compressed gas cylinders be stored on a construction site to comply with OSHA regulations?

Accepted Answer

Upright and secured with chains or straps away from heat sources

Answer

OSHA requires compressed gas cylinders to be stored upright, secured with chains or straps, and away from heat sources to prevent rupture or explosion.

General Contractor License Practice Test

General Contractor License Practice Test

General Contractor License Construction Safety and OSHA 5