General Contractor License Safety and OSHA Regulations Questions and Answers

Question 1

According to OSHA standards for construction (29 CFR 1926), what is the minimum height at which fall protection is required on a walking/working surface with an unprotected side or edge?

Accepted Answer

6 feet

Answer

4 feet

Answer

10 feet

Answer

8 feet

Question 2

A trench is dug to a depth of 8 feet in Type B soil. Which of the following is an acceptable protective system according to OSHA?

Accepted Answer

Sloping the excavation walls at a 1-to-1 ratio (45 degrees).

Answer

Benching the excavation walls at a 90-degree angle.

Answer

Having a competent person visually monitor the trench for signs of collapse while work is performed.

Answer

No system is needed as long as the trench is less than 10 feet deep.

Question 3

Under OSHA's Hazard Communication Standard (HCS), which of the following is a key responsibility of a general contractor on a multi-employer worksite?

Accepted Answer

Ensuring Safety Data Sheets for all hazardous chemicals are readily accessible to all workers.

Answer

Authoring the Safety Data Sheet (SDS) for every chemical brought on site.

Answer

Personally testing each chemical to verify its listed hazards.

Answer

Requiring subcontractors to use only non-hazardous materials.

Question 4

A worker is tasked with servicing a permanently installed air conditioning unit. To comply with Lockout/Tagout (LOTO) standards, what is the critical first step in the process?

Accepted Answer

Notify all affected employees that the equipment will be shut down for service.

Answer

Apply the lock and tag to the disconnect switch.

Answer

Immediately begin the repair to minimize downtime.

Answer

Verify that the system is de-energized by trying to start it.

Question 5

A contractor identifies a serious ergonomic hazard related to repetitive heavy lifting that is causing injuries, but there is no specific OSHA standard for this particular task. Under which provision can OSHA still cite the employer for failing to protect its workers?

Accepted Answer

The General Duty Clause (Section 5(a)(1))

Answer

The Whistleblower Protection Act

Answer

The Personal Protective Equipment (PPE) Standard

Answer

The Hazard Communication Standard (HCS)

Question 6

An employer is required to maintain records of work-related injuries and illnesses. Which OSHA form serves as the detailed incident report for each individual recordable case?

Accepted Answer

Form 301 (Injury and Illness Incident Report)

Answer

Form 300A (Summary of Work-Related Injuries and Illnesses)

Answer

Form I-9 (Employment Eligibility Verification)

Answer

Form 300 (Log of Work-Related Injuries and Illnesses)