F60 Hot Work Permit Procedures 2

Question 1

Who is authorized to issue a hot work permit for torch operations in New York City?

Accepted Answer

The building owner or their designated representative

Answer

A hot work permit must be issued by the building owner or their authorized representative, not the fire guard performing the work.

Question 2

What is the maximum duration typically allowed for a single hot work permit before it must be renewed?

Accepted Answer

One shift or one day

Answer

A hot work permit is typically valid for one shift or one work day and must be renewed if work continues beyond that period.

Question 3

Before signing the hot work permit, the fire watch must verify that:

Accepted Answer

A fire extinguisher is fully charged and within reach of the work area

Answer

A fully charged, appropriate fire extinguisher must be immediately accessible before any hot work begins and before signing the permit.

Question 4

When torch operations are conducted near a sprinkler head, what precaution is required on the hot work permit?

Accepted Answer

Temporary shielding must be used and noted on the permit

Answer

Temporary shielding protects sprinkler heads from heat activation and must be documented on the permit as a required precaution.

Question 5

What action must be taken if hot work must continue into a second shift?

Accepted Answer

A new permit must be issued and signed for the second shift

Answer

Each new shift requires a fresh permit with all conditions re-evaluated and re-signed by the authorized issuing party.

(F60) Certificate of Fitness for Fire Guard for Torch Operations Practice Test