F60 Hot Work Permit Procedures Questions and Answers 1 — Questions and Answers
Question 1: A hot work authorization document is issued by the responsible person overseeing a project. For how long must this authorization be available for inspection on-site after the work is completed?
- For 24 hours
- Until the project is completely finished
- For 48 hours (Correct answer)
- Until the Fire Guard leaves the site
Correct answer: For 48 hours
According to FDNY regulations, the hot work program authorization must be available for inspection by any representative of the Fire Department during the work and for 48 hours after the work is complete.
Question 2: Which of the following statements about a 'citywide permit' for torch operations is correct?
- It allows the holder to perform hot work without a Fire Guard.
- It is issued by the building owner, not the FDNY.
- It is the only permit needed to perform any type of hot work anywhere in NYC.
- It requires an F-60 Fire Guard to be present for the fire watch when used in any building or structure. (Correct answer)
Correct answer: It requires an F-60 Fire Guard to be present for the fire watch when used in any building or structure.
The FDNY study material explicitly states that an F-60 fire guard is required to perform the fire watch in any building or structure when the torch operation is conducted by a person holding a citywide permit for torch operations.
Question 3: A contractor is setting up for a torch operation. Who is responsible for completing and signing the hot work program authorization before work begins?
- The F-60 Fire Guard on duty
- The owner of the building
- The FDNY inspector
- The responsible person designated by the owner (Correct answer)
Correct answer: The responsible person designated by the owner
A hot work program authorization is not issued by the FDNY. It must be signed and issued by the 'responsible person' designated by the building or structure owner to oversee the hot work program.
Question 4: On a multi-level construction site, a torch operator is working on the 5th floor. In addition to the fire guard on the 5th floor, what other precaution is specifically required?
- A second fire guard positioned on the floor below the operation. (Correct answer)
- An additional fire extinguisher placed on the roof.
- The building's sprinkler system must be shut down.
- All windows on the 4th and 5th floors must be covered.
Correct answer: A second fire guard positioned on the floor below the operation.
When hot work is performed in a multi-level building, a second fire guard is required to be positioned on the floor directly below the torch operations to watch for and extinguish any stray sparks that may fall.
Question 5: A 'Pre-Hot Work Check' form must be completed daily before torch operations begin. Who is primarily responsible for maintaining this form at the work site and making it available for FDNY inspection?
- The building manager
- The torch operator holding the G-60 certificate
- The Fire Guard holding the F-60 certificate (Correct answer)
- The site safety manager
Correct answer: The Fire Guard holding the F-60 certificate
The Fire Guard is responsible for maintaining the Pre-Hot Work Check Form at the work site during the work and making it available for inspection by any representative of the FDNY.
Question 6: Which of the following is a key component that must be documented in the fire guard's inspection log?
- The weather conditions during the hot work.
- The names and signatures of the fire guards on duty. (Correct answer)
- The serial numbers of the fire extinguishers.
- The lunch break schedule for the hot work operator.
Correct answer: The names and signatures of the fire guards on duty.
The fire guard must keep a detailed inspection log that records the names and signatures of the fire guards, the dates, the number of inspections conducted, and any fires that were discovered.
F60 Hot Work Permit Procedures Questions and Answers 1
A hot work authorization document is issued by the responsible person overseeing a project.
For how long must this authorization be available for inspection on-site after the work is completed?