F60 Hot Work Permit Procedures 2

Question 1

Who is authorized to issue a hot work permit for torch operations in New York City?

Accepted Answer

The building owner or their designated representative

Answer

Any licensed contractor

Answer

The fire guard on duty

Answer

The NYC Fire Department commissioner

Question 2

What is the maximum duration typically allowed for a single hot work permit before it must be renewed?

Accepted Answer

One shift or one day

Answer

4 hours

Answer

8 hours

Answer

One week

Question 3

Before signing the hot work permit, the fire watch must verify that:

Accepted Answer

A fire extinguisher is fully charged and within reach of the work area

Answer

All workers have completed OSHA training

Answer

The permit fee has been paid

Answer

The building sprinkler system is shut off

Question 4

When torch operations are conducted near a sprinkler head, what precaution is required on the hot work permit?

Accepted Answer

Temporary shielding must be used and noted on the permit

Answer

The sprinkler head must be removed

Answer

The sprinkler head must be covered with a wet cloth permanently

Answer

No special precaution is needed if work is more than 10 feet away

Question 5

What action must be taken if hot work must continue into a second shift?

Accepted Answer

A new permit must be issued and signed for the second shift

Answer

The original permit remains valid for the entire project

Answer

The fire guard simply initials the existing permit

Answer

Verbal authorization from a supervisor is sufficient

Question 6

Which section of the hot work permit specifically addresses the condition of the work area before operations begin?

Accepted Answer

Pre-work inspection checklist

Answer

Contractor information block

Answer

Insurance verification section

Answer

Equipment calibration log

Question 7

If a hot work permit is voided mid-operation due to unsafe conditions, what must happen?

Accepted Answer

All hot work must cease immediately until a new permit is issued after conditions are corrected

Answer

Work may continue at a reduced pace

Answer

The fire guard may reauthorize the permit verbally

Answer

Work can resume after a 15-minute cooling period