ServSafe Manager Practice Exam

Question 1

A food manager is setting up a HACCP plan for a chicken dish that is cooked, cooled, and reheated the next day. Which step represents a Critical Control Point (CCP) for this process?

Accepted Answer

Cooking the chicken to an internal temperature of 165°F (74°C)

Answer

Cooking is a Critical Control Point because it is the step where the biological hazard (pathogens such as Salmonella in chicken) can be eliminated by reaching the required internal temperature of 165°F (74°C). Cooling and reheating are also CCPs in this process, but cooking is the primary CCP where pathogen elimination occurs.

Question 2

What is the maximum amount of time cooked potentially hazardous food (TCS food) can remain in the temperature danger zone during the cooling process?

Accepted Answer

6 hours total (135°F to 70°F in 2 hours, then to 41°F in 4 more hours)

Answer

According to the FDA Food Code, TCS food must be cooled from 135°F to 70°F within 2 hours, then from 70°F to 41°F or below within the next 4 hours — a total maximum cooling time of 6 hours. The two-stage process is designed to move food quickly through the range where bacterial growth is fastest (between 70°F and 125°F).

Question 3

Which practice BEST prevents cross-contamination between raw meats and ready-to-eat foods in a walk-in cooler?

Accepted Answer

Store raw meats below ready-to-eat foods, organized by required cooking temperature

Answer

Raw meats should be stored below ready-to-eat foods and separated by their required final cooking temperatures (top to bottom: ready-to-eat foods, then seafood, then whole cuts of beef/pork, then ground meats, then poultry at the bottom). This prevents juices from higher-risk raw proteins from dripping onto foods with lower required cooking temperatures or onto ready-to-eat items.

Question 4

A sanitizing solution is prepared using chlorine bleach. After mixing, a test strip shows the concentration is 10 ppm. What action should the food handler take?

Accepted Answer

Discard the solution and prepare a new one at the correct concentration (50–100 ppm)

Answer

Chlorine-based sanitizing solutions for immersion or manual washing of food-contact surfaces must be between 50 ppm and 100 ppm (some applications allow up to 200 ppm). At 10 ppm, the solution is too weak to effectively sanitize and will not reduce pathogens to safe levels. The handler must discard the solution and prepare a new one at the correct concentration.

Question 5

A food service manager learns that several customers have reported illness after eating at the restaurant. The symptoms include watery diarrhea and vomiting beginning 6–24 hours after eating. Which pathogen is MOST likely responsible?

Accepted Answer

Salmonella spp.

Answer

Salmonella spp. typically causes symptoms (nausea, vomiting, diarrhea, abdominal cramps, fever) within 6–48 hours of consuming contaminated food. It is one of the most common causes of foodborne illness and is associated with poultry, eggs, dairy, and produce. Staphylococcus aureus has a much shorter onset (1–6 hours). Clostridium botulinum causes neurological symptoms, not primarily GI symptoms.

ServSafe Food Safety Test Prep Practice Test

ServSafe Food Safety Test Prep Practice Test

ServSafe Manager Practice Exam