NDT - Non-Destructive Testing Ultrasonic Testing Principles Questions and Answers

Question 1

In ultrasonic testing, what is the primary purpose of using a couplant between the transducer and the test specimen?

Accepted Answer

To eliminate the air gap and facilitate the transmission of sound energy.

Answer

The primary function of a couplant is to displace the air between the transducer and the test piece. Air has a very low acoustic impedance compared to both the transducer and most solid materials, causing a significant impedance mismatch. This mismatch would reflect nearly all the ultrasonic energy, preventing it from entering the test specimen. The couplant, typically a liquid or gel, provides a medium for efficient sound energy transmission.

Question 2

Which of the following best describes the principle of acoustic impedance in the context of ultrasonic testing?

Accepted Answer

It is a measure of the material's resistance to the propagation of sound waves, calculated as density times velocity.

Answer

Acoustic impedance (Z) is a fundamental property of a material that quantifies its resistance to the passage of sound. It is calculated as the product of the material's density (ρ) and the acoustic velocity (c) within that material (Z = ρc). The difference in acoustic impedance between two materials governs the amount of sound energy reflected and transmitted at their boundary, which is the foundational principle for detecting flaws.

Question 3

A technician is performing an angle beam inspection on a steel weld. The ultrasonic wave travels from a plastic wedge into the steel. According to Snell's Law, what will happen to the sound wave as it enters the steel?

Accepted Answer

The wave will bend or refract at an angle determined by the velocities in the two materials.

Answer

Snell's Law describes the relationship between the angles and velocities of waves as they pass from one medium to another. When an ultrasonic wave enters a material with a different acoustic velocity at an angle, it will refract, or change direction. The angle of refraction is dependent on the angle of incidence and the velocities of sound in the first medium (the plastic wedge) and the second medium (steel).

Question 4

In ultrasonic testing, which wave mode has particle motion perpendicular to the direction of wave propagation and cannot travel through liquids or gases?

Accepted Answer

Shear waves

Answer

Shear waves, also known as transverse waves, are characterized by particle motion that is perpendicular (transverse) to the direction the wave is traveling. Because they rely on the elastic properties of a solid to support this type of motion, they cannot be sustained in liquids or gases, which lack significant shear strength.

Question 5

When increasing the frequency of the transducer in an ultrasonic test, what is the expected effect on the inspection's sensitivity and wavelength?

Accepted Answer

Sensitivity increases and wavelength decreases.

Answer

The relationship between velocity (V), frequency (f), and wavelength (λ) is given by V = fλ. Since the velocity of sound is constant for a given material, increasing the frequency must cause the wavelength to decrease. A shorter wavelength allows for the detection of smaller discontinuities, thus increasing the sensitivity of the inspection.

NDT - Non-Destructive Testing Practice Test

NDT - Non-Destructive Testing Practice Test

NDT - Non-Destructive Testing Ultrasonic Testing Principles Questions and Answers