FREE AMT Maintenance Forms and Regulations Questions and Answers

Question 1

A technician installs a new GPS/NAV/COMM system that was not part of the aircraft's original type design. This installation is determined to be a major alteration. Which form is required to be completed and submitted to the FAA to document this work?

Accepted Answer

FAA Form 337

Answer

According to 14 CFR Part 43, a major alteration requires the completion of FAA Form 337, Major Repair and Alteration. This form provides a detailed record of the work performed and the data used to approve the aircraft for return to service. A copy is given to the owner and another is sent to the FAA to become part of the aircraft's permanent records.

Question 2

Which of the following statements is true regarding Airworthiness Directives (ADs)?

Accepted Answer

Compliance is mandatory for all applicable aircraft.

Answer

Airworthiness Directives are legally enforceable regulations issued by the FAA under 14 CFR Part 39 to correct an unsafe condition found in an aircraft, engine, propeller, or appliance. Compliance is mandatory for all owners and operators of the affected products.

Question 3

An aircraft is used for commercial flight instruction and has flown 99 hours since its last inspection. The annual inspection is not due for another six months. According to 14 CFR Part 91, which action is required before this aircraft can be legally flown for hire again?

Accepted Answer

A 100-hour inspection must be completed.

Answer

14 CFR § 91.409(b) states that no person may operate an aircraft for carrying any person for hire or for flight instruction for hire unless it has received a 100-hour inspection within the preceding 100 hours of time in service. An annual inspection can substitute for a 100-hour, but since the annual is not due, the 100-hour inspection is the required action.

Question 4

A technician needs to find the specific control surface travel limits for an aircraft to verify proper rigging after a cable change. Which of the following is the official source for this type of certification data?

Accepted Answer

The Type Certificate Data Sheet (TCDS)

Answer

The Type Certificate Data Sheet (TCDS) is the formal description of the aircraft, engine, or propeller and contains the official specifications and limitations required for airworthiness. This includes data such as control surface movements, weight and balance limits, and required placards.

Question 5

According to 14 CFR § 43.11, which of the following items must be included in the maintenance record entry after completing an annual inspection and approving the aircraft for return to service?

Accepted Answer

The signature, certificate number, and kind of certificate held by the person approving the return to service.

Answer

14 CFR § 43.11 specifies the required content for inspection record entries. It mandates including the type of inspection, date, aircraft total time, and the signature, certificate number, and type of certificate of the person approving or disapproving the return to service. While a list of discrepancies is required if disapproved, a list of all replaced parts is not a specified requirement for the approval entry itself.

(AMT) Aviation Maintenance Technician Practice Test

(AMT) Aviation Maintenance Technician Practice Test

FREE AMT Maintenance Forms and Regulations Questions and Answers