FREE AMT Maintenance Forms and Regulations Questions and Answers

Question 1

A technician installs a new GPS/NAV/COMM system that was not part of the aircraft's original type design.
This installation is determined to be a major alteration.
Which form is required to be completed and submitted to the FAA to document this work?

Accepted Answer

FAA Form 337

Answer

Airworthiness Directive Compliance Record

Answer

Malfunction or Defect Report

Answer

Aircraft Flight Manual Supplement

Question 2

Which of the following statements is true regarding Airworthiness Directives (ADs)?

Accepted Answer

Compliance is mandatory for all applicable aircraft.

Answer

They are optional recommendations issued by the aircraft manufacturer.

Answer

They only apply to aircraft operated under 14 CFR Part 121.

Answer

A properly certificated pilot may sign off compliance for most ADs.

Question 3

An aircraft is used for commercial flight instruction and has flown 99 hours since its last inspection. The annual inspection is not due for another six months. According to 14 CFR Part 91, which action is required before this aircraft can be legally flown for hire again?

Accepted Answer

A 100-hour inspection must be completed.

Answer

A progressive inspection must be started.

Answer

A special flight permit must be obtained from the FSDO.

Answer

The annual inspection must be performed early.

Question 4

A technician needs to find the specific control surface travel limits for an aircraft to verify proper rigging after a cable change. Which of the following is the official source for this type of certification data?

Accepted Answer

The Type Certificate Data Sheet (TCDS)

Answer

The aircraft maintenance logbooks

Answer

Advisory Circular 43.13-1B

Answer

14 CFR Part 43, Appendix A

Question 5

According to 14 CFR § 43.11, which of the following items must be included in the maintenance record entry after completing an annual inspection and approving the aircraft for return to service?

Accepted Answer

The signature, certificate number, and kind of certificate held by the person approving the return to service.

Answer

A list of all parts replaced during the inspection.

Answer

The name and address of the aircraft owner.

Answer

The estimated date for the next required inspection.

Question 6

After performing a minor repair on an aircraft, a technician makes a maintenance record entry. According to 14 CFR § 43.9, what is the minimum information required in this entry?

Accepted Answer

A description of the work, date of completion, name of person performing the work, and signature/certificate number of the person approving the return to service.

Answer

The technician's signature and the total time in service of the aircraft.

Answer

A reference to the applicable maintenance manual chapter and the date of completion.

Answer

The part number of the component installed and a copy of its airworthiness approval tag.

A technician installs a new GPS/NAV/COMM system that was not part of the aircraft's original type design.This installation is determined to be a major alteration.Which form is required to be completed and submitted to the FAA to document this work?

A technician installs a new GPS/NAV/COMM system that was not part of the aircraft's original type design.
This installation is determined to be a major alteration.
Which form is required to be completed and submitted to the FAA to document this work?