F60 Torch Operations & Combustibles 3

Question 1

Which fire extinguisher class is most appropriate for extinguishing a fire in roofing materials ignited by torch operations?

Accepted Answer

Class A

Answer

Class A extinguishers are designed for ordinary combustibles such as wood, paper, and roofing materials.

Question 2

What is the primary purpose of a hot work permit for torch operations?

Accepted Answer

To authorize hot work and establish safety precautions

Answer

A hot work permit formally authorizes the work and establishes required safety measures that must be in place before operations begin.

Question 3

Torch slag and sparks can travel up to what distance from the point of operation?

Accepted Answer

35 feet

Answer

Torch sparks and slag can travel up to 35 feet from the point of operation, requiring a large clear zone.

Question 4

Before torch operations begin on a roof, a fire guard should verify that:

Accepted Answer

All combustible debris has been removed from the work area

Answer

Combustible debris such as leaves, scrap wood, and old roofing material must be cleared before torch work begins.

Question 5

If a fire guard discovers a fire during the 30-minute post-work inspection that cannot be controlled with a portable extinguisher, what is the FIRST action?

Accepted Answer

Activate the building fire alarm and call 911

Answer

When a fire exceeds the capacity of a portable extinguisher, the fire guard must immediately activate the alarm and call 911.

(F60) Certificate of Fitness for Fire Guard for Torch Operations Practice Test

(F60) Certificate of Fitness for Fire Guard for Torch Operations Practice Test

F60 Torch Operations & Combustibles 3