F60 Fire Guard Responsibilities 3

Question 1

What is the minimum clearance radius that must be maintained between a torch flame and combustible materials?

Accepted Answer

10 feet

Answer

A minimum 10-foot clearance radius must be maintained between the torch flame and all combustible materials.

Question 2

A fire guard is assigned to watch a roofing operation where tar is being applied with a torch. Which hazard requires special attention on a flat roof?

Accepted Answer

Combustible roof insulation or membrane igniting

Answer

On flat roofs, combustible insulation boards and roofing membranes are a primary ignition hazard that the fire guard must monitor closely.

Question 3

Before torch operations start in a building, what must the fire guard verify about fire suppression equipment?

Accepted Answer

That at least one extinguisher and a charged hose line are available and operable

Answer

The fire guard must confirm that at least one appropriate fire extinguisher and a charged hose line are available and in working condition before operations begin.

Question 4

During a fire watch after torch operations, the fire guard smells smoke but cannot see any visible flame. The correct action is:

Accepted Answer

Immediately investigate the source and activate the fire alarm if a fire is found

Answer

Any sign of smoke must be immediately investigated, and if a fire source is found, the alarm must be activated without delay.

Question 5

Which type of fire extinguisher is most appropriate for a fire guard to have on hand during torch operations involving flammable gases?

Accepted Answer

Class B:C rated extinguisher

Answer

A Class B:C rated extinguisher is appropriate for flammable gas and electrical hazards typically associated with torch operations.

(F60) Certificate of Fitness for Fire Guard for Torch Operations Practice Test

(F60) Certificate of Fitness for Fire Guard for Torch Operations Practice Test

F60 Fire Guard Responsibilities 3