F60 Fire Guard Duties & Responsibilities 3

Question 1

A fire guard's hot work permit covers operations from 8 AM to 4 PM. Work runs late. What is required?

Accepted Answer

A new or extended permit must be obtained before continuing

Answer

Hot work permits are time-specific; work beyond the permit window requires a new or amended permit before continuing.

Question 2

When inspecting a work area before torch operations begin, which condition would require the fire guard to delay the start of work?

Accepted Answer

Cardboard boxes stored directly adjacent to the work zone

Answer

Combustible materials adjacent to the work zone must be removed or shielded before torch operations can begin safely.

Question 3

What information must be recorded in the fire watch log by the fire guard?

Accepted Answer

Time, location, observations, and any incidents

Answer

The fire watch log must document times, work locations, conditions observed, and any fire or hazard incidents.

Question 4

A fire guard smells smoke behind a wall near a recently completed torch area. What is the correct response?

Accepted Answer

Investigate immediately and treat it as a potential fire condition

Answer

Smoke smell is a fire indicator; the fire guard must investigate immediately and initiate emergency procedures if fire is confirmed.

Question 5

Under FDNY rules, who is responsible for ensuring a fire guard is present before torch operations begin?

Accepted Answer

The contractor performing the torch work

Answer

The contractor performing hot work is responsible for ensuring a certified fire guard is on-site before any torch operation begins.

(F60) Certificate of Fitness for Fire Guard for Torch Operations Practice Test