F60 Fire Extinguisher Requirements 2

Question 1

When using a torch for roofing operations, what minimum fire extinguisher rating is required to be on site?

Accepted Answer

2-A:20-B:C

Answer

NYC regulations require at least a 2-A:20-B:C rated extinguisher on site during torch operations.

Question 2

A fire extinguisher used during torch operations shows a pressure gauge in the red zone. What must the fire guard do?

Accepted Answer

Remove it from service and replace it immediately

Answer

An extinguisher with a gauge in the red zone is not fully charged and must be removed from service and replaced before work begins.

Question 3

How far from the torch operation must the fire extinguisher be positioned for quick access?

Accepted Answer

Within 30 feet

Answer

The extinguisher must be positioned within 30 feet of the work area to ensure rapid access in an emergency.

Question 4

Which type of fire extinguisher is NOT suitable for use when a torch operation involves both flammable gases and energized electrical equipment nearby?

Accepted Answer

Water-based (Class A only)

Answer

A water-based extinguisher is only rated for Class A fires and is dangerous near energized electrical equipment.

Question 5

After a fire extinguisher has been partially discharged during an emergency at a torch operation, what is the correct action?

Accepted Answer

Remove it from service and have it recharged or replaced

Answer

A partially discharged extinguisher must be recharged or replaced before it can be relied upon again.

(F60) Certificate of Fitness for Fire Guard for Torch Operations Practice Test

(F60) Certificate of Fitness for Fire Guard for Torch Operations Practice Test

F60 Fire Extinguisher Requirements 2