F60 Construction Site Fire Safety 2

Question 1

When torch operations are performed near combustible wall framing, what is the minimum clearance distance required before ignition begins?

Accepted Answer

36 inches

Answer

A minimum 36-inch clearance from combustible materials is required before torch operations begin.

Question 2

Which document must be completed and posted at the work site before any torch operation can legally begin on a construction site in NYC?

Accepted Answer

Hot Work Permit

Answer

A Hot Work Permit must be completed and posted at the site prior to initiating any torch operations.

Question 3

What is the fire guard's primary responsibility during a torch operation on a construction site?

Accepted Answer

Monitoring for fire ignition and maintaining suppression readiness

Answer

The fire guard must continuously monitor for ignition sources and be ready to suppress any fire immediately.

Question 4

After torch operations are completed, how long must a fire watch be maintained at the construction site?

Accepted Answer

30 minutes

Answer

FDNY regulations require a minimum 30-minute fire watch after torch operations cease to detect smoldering materials.

Question 5

Which type of fire extinguisher is most appropriate for a construction site where torch operations may ignite both ordinary combustibles and flammable liquids?

Accepted Answer

Class ABC dry chemical

Answer

A Class ABC dry chemical extinguisher covers ordinary combustibles, flammable liquids, and energized electrical equipment.

(F60) Certificate of Fitness for Fire Guard for Torch Operations Practice Test

(F60) Certificate of Fitness for Fire Guard for Torch Operations Practice Test

F60 Construction Site Fire Safety 2