F-02 Study Guide 2026

Everything you need to pass the F-02 exam in one place: the exam format, every topic to study, real practice questions with explanations, flashcards, and full-length practice tests. Free, no sign-up needed.

📋 F-02 Exam Format at a Glance

20
Questions
30 min
Time Limit
70%
Passing Score

📚 F-02 Topics to Study (92)

✍️ Sample F-02 Questions & Answers

1. What color on the NFPA 704 diamond indicates flammability hazard?
Red

Red is the color for flammability hazard on the NFPA 704 diamond, located at the top of the diamond. A rating of 0 means the material will not burn, while a rating of 4 means it will rapidly vaporize and burn readily at normal temperatures.

2. What is the correct entry in a fire watch log when a fireguard completes a patrol and finds no hazards?
Record the patrol start time, areas covered, completion time, and note 'all areas patrolled — no hazards observed'

A complete no-hazard entry includes start time, areas patrolled, completion time, and a clear notation that all areas were found free of hazards.

3. At what maximum height above the floor should the carrying handle of a portable fire extinguisher weighing more than 40 lbs be mounted?
5 feet

NFPA 10 requires that heavier extinguishers (over 40 lbs) have their carrying handle mounted no higher than 3.5 feet, while lighter units can be mounted up to 5 feet — the 5-foot rule applies to lighter units.

4. During an evacuation, which floor should be evacuated FIRST after the fire floor?
The floor directly above the fire floor

Heat and smoke rise, so the floor immediately above the fire is at the greatest risk and should be the second priority for evacuation.

5. At the beginning of a new fire watch shift, what should a fireguard do before starting their first patrol?
Review the previous shift's fire watch log, get briefed on current system status, sign in to the log, and confirm the areas to be patrolled

Before beginning patrols, the incoming fireguard must review the previous log entries, receive a briefing on current system status and any open issues, and make their opening log entry.

6. What should an F-02 Fireguard do FIRST upon hearing the fire alarm signal?
Investigate the source of the alarm

The Fireguard should first investigate the source of the alarm to determine if there is an actual fire condition. This allows the Fireguard to provide accurate information to the fire department and building management. Premature evacuation or calling 911 without verification can waste resources.

🎯 Free F-02 Practice Tests

📖 F-02 Guides & Articles

Your F-02 Study Path
1. Learn with Flashcards → 2. Drill Practice Tests → 3. Take the Full Exam Simulation