Fireguard Fire Protection Systems Flashcards
7 cards from real F-02 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Fireguard Fire Protection Systems flashcards as text
What is the operating temperature range for standard-response sprinkler heads (ordinary hazard) used in most office environments?
Answer: 135–170°F (57–77°C)
Ordinary-temperature-rated sprinkler heads activate between 135–170°F, making them appropriate for spaces where ambient temperatures don't exceed 100°F.
A deluge fire suppression system differs from a standard wet pipe system because:
Answer: All sprinkler heads are open and discharge simultaneously when the system activates
Deluge systems have open sprinkler heads with no heat-sensitive elements, so water discharges from all heads simultaneously when the deluge valve opens.
Which document must a Fireguard maintain to record daily inspections of fire protection equipment?
Answer: Fire protection log or record book
Fireguards are required by NYC Fire Code to maintain a written log recording all inspections, tests, and maintenance activities on fire protection systems.
What is the purpose of the fire department connection (FDC) on a sprinkler or standpipe system?
Answer: It provides a connection for FDNY to supplement or boost water supply to the system
The FDC allows FDNY to connect their hose lines and pump additional water into the building's fire protection system during firefighting operations.
Under NFPA 25, how frequently must a wet pipe sprinkler system undergo a full internal inspection?
Answer: Every 5 years
NFPA 25 requires internal inspection of wet pipe sprinkler system piping every 5 years to check for corrosion, debris, or other obstructions.
A sprinkler system's inspector test valve (ITV) is used to:
Answer: Simulate the flow of a single sprinkler head to test the water flow alarm
The inspector test valve simulates activation of a single sprinkler head, confirming that the water flow alarm and monitoring systems are working properly.
In which situation would a Fireguard be required to implement a fire watch?
Answer: When a fire protection system is out of service or impaired
A fire watch is required when a fire protection system is out of service, impaired, or undergoing maintenance to provide a manual substitute for the automated system.