Practice Test Geeks(F-02) Fireguard Practice Test
← All F-02 Flashcard Decks

Fireguard Fire Protection Systems Flashcards

7 cards from real F-02 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Fireguard Fire Protection Systems flashcards as text

  1. Under NYC Fire Code, how often must a Fireguard with an F-02 certificate of fitness inspect the fire protection systems in their building?

    Answer: At least once every 24 hours when the building is occupied

    F-02 Fireguards are required to inspect fire protection systems at least once every 24 hours during periods of occupancy.

  2. A tamper switch on a sprinkler control valve is used to:

    Answer: Detect and signal when a valve has been moved from its normal position

    Tamper switches monitor valve positions and send an alarm signal to the fire alarm panel if a valve is moved from its fully open position.

  3. Which class of standpipe system provides hose connections for occupant use AND fire department connections?

    Answer: Class III

    Class III standpipes combine both 2½-inch fire department connections and 1½-inch hose connections for occupant use.

  4. What action should a Fireguard take FIRST upon discovering a sprinkler head has been accidentally damaged?

    Answer: Notify the FDNY and building management immediately

    Damaged sprinkler heads compromise fire protection and must be reported immediately to FDNY and building management so proper repairs can be made.

  5. In a fire alarm system, what is the function of a 'pull station'?

    Answer: It manually initiates a fire alarm when pulled by a person

    Manual pull stations allow occupants or staff to manually trigger the fire alarm system when they discover a fire.

  6. What is a 'riser' in the context of a fire protection system?

    Answer: A vertical pipe that supplies water to multiple floors of a building

    A riser is a vertical pipe in a sprinkler or standpipe system that carries water supply upward through the building to serve multiple floors.

  7. When a fire alarm is activated in a building, what is the Fireguard's primary responsibility?

    Answer: Investigate the source, ensure evacuation if needed, and notify FDNY

    Fireguards must investigate the alarm source, coordinate evacuation if a real fire exists, and immediately notify FDNY as required by NYC Fire Code.