Practice Test Geeks(F-02) Fireguard Practice Test
← All F-02 Flashcard Decks

Fireguard Fire Protection Systems Flashcards

7 cards from real F-02 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Fireguard Fire Protection Systems flashcards as text

  1. What color coding indicates a sprinkler head rated for high-temperature service (286°F / 141°C)?

    Answer: Purple

    Purple-coded sprinkler heads are rated for high-temperature service at 286°F (141°C), used in areas with elevated ambient temperatures.

  2. What is the role of a 'pressure reducing valve' (PRV) in a high-rise building standpipe system?

    Answer: It limits outlet pressure to prevent damage to hose lines and fittings on lower floors

    PRVs limit the pressure at standpipe outlets on lower floors where static pressure would otherwise be too high for fire hose use.

  3. Which NFPA standard governs the installation of fire alarm systems in buildings?

    Answer: NFPA 72

    NFPA 72, the National Fire Alarm and Signaling Code, governs the installation, testing, and maintenance of fire alarm and signaling systems.

  4. A Fireguard discovers that a sprinkler head in a storage room has been painted over. What is the correct action?

    Answer: Report it as a deficiency and arrange for replacement since paint can prevent activation

    Paint on a sprinkler head can prevent the heat-sensitive element from activating, making the head non-functional and a fire code violation requiring immediate replacement.

  5. In a pre-action sprinkler system, what TWO events must occur before water is discharged?

    Answer: A detection device activates AND a sprinkler head fuses open

    Pre-action systems require both a detection device (smoke or heat detector) to activate AND a sprinkler head to fuse open, providing double confirmation before discharging water.

  6. What information must be posted at each floor's standpipe hose connection in a NYC building?

    Answer: Instructions for connecting and operating the hose, and the floor number

    NYC Fire Code requires operating instructions and floor identification to be posted at standpipe hose connections so occupants and firefighters can use them correctly.

  7. When performing a quarterly inspection of fire extinguishers, a Fireguard notices the pressure gauge needle is in the red zone. This means:

    Answer: The extinguisher is undercharged or overcharged and must be removed from service

    A needle in the red zone indicates the extinguisher pressure is outside the acceptable range (either too high or too low), requiring immediate removal from service and recharging.