Practice Test Geeks(F-02) Fireguard Practice Test
← All F-02 Flashcard Decks

Fire Prevention Flashcards

7 cards from real F-02 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Fire Prevention flashcards as text

  1. Under NYC Fire Code, what is the maximum allowable gap under a fire door to maintain its fire-resistance rating?

    Answer: 3/4 inch

    A gap of up to 3/4 inch under a fire door is permitted while still maintaining the door's fire-resistance rating.

  2. A Fireguard notices combustible materials stored within 18 inches of a sprinkler head. What action should be taken?

    Answer: Immediately remove or relocate the materials

    Materials must be kept at least 18 inches below sprinkler heads to ensure the spray pattern is not obstructed; the Fireguard must immediately correct the violation.

  3. Which of the following best describes a 'hot work' operation that requires a Fireguard permit in New York City?

    Answer: Performing welding or torch-cutting on a rooftop

    Welding, torch-cutting, and similar operations that produce open flame or sparks constitute hot work requiring a Fireguard permit under NYC Fire Code.

  4. How often must a Fireguard conduct fire prevention inspections of the premises during an assigned shift?

    Answer: Every two hours or as directed by the Certificate of Fitness

    Fireguards must patrol and inspect the premises at intervals not exceeding two hours, or more frequently as specified on their Certificate of Fitness.

  5. What is the primary purpose of posting a 'No Smoking' sign in a hazardous area?

    Answer: To eliminate an ignition source near flammable materials

    No Smoking signs eliminate a key ignition source (open flame or lit tobacco) from areas where flammable or combustible materials are present.

  6. During a fire prevention inspection, a Fireguard discovers an exit door that is locked from the inside with a padlock during business hours. What should the Fireguard do?

    Answer: Immediately remove the obstruction to ensure egress is available

    Exit doors must never be locked or obstructed during occupancy; the Fireguard must immediately ensure egress is available and report the violation.

  7. Which class of fire extinguisher is specifically designed to combat fires involving cooking oils and fats in commercial kitchens?

    Answer: Class K

    Class K extinguishers use wet chemical agents specifically formulated to suppress high-temperature cooking oil and fat fires in commercial kitchens.