CFESA HACCP Principles and Food Safety Compliance for Equipment

Question 1

Under FDA Food Code and HACCP principles, what is the minimum internal temperature required for hot food to be held safely in a steam table or hot-holding cabinet?

Accepted Answer

135°F (57°C)

Answer

The FDA Food Code specifies 135°F (57°C) as the minimum temperature for hot-held cooked food to remain out of the 'temperature danger zone' (41°F–135°F). A steam table or hot-holding cabinet that cannot maintain this temperature is a food safety violation and must be repaired before returning to service.

Question 2

A commercial refrigerator is consistently holding product at 42–44°F (5.6–6.7°C). Why is this a food safety concern even though the unit appears to be cooling?

Accepted Answer

The temperature exceeds the FDA Food Code maximum of 41°F (5°C) for refrigerated food storage, allowing accelerated pathogen growth

Answer

FDA Food Code Section 3-501.16 requires refrigerated potentially hazardous food (PHF) to be maintained at 41°F (5°C) or below. At 42–44°F, pathogens such as Salmonella and Listeria can grow at a meaningful rate. A unit holding 2–3°F above the limit requires recalibration or repair and cannot be used for PHF storage until corrected.

Question 3

When a technician replaces a food-contact gasket on a commercial refrigerator door, which NSF-related requirement must the replacement part meet?

Accepted Answer

The replacement gasket must be NSF/ANSI 51 listed (food equipment materials), non-toxic, non-absorbent, and smooth-surfaced to prevent bacterial harborage

Answer

NSF/ANSI 51 governs materials used in food zone components. Gaskets must be non-toxic, non-porous, and have a surface that can be effectively cleaned and sanitized. Using a non-listed gasket material violates the equipment's NSF listing and may introduce chemical contamination or harbor biofilm.

Question 4

A HACCP plan identifies the final cooking step in a commercial oven as a Critical Control Point (CCP) for poultry. What is the technician's responsibility when servicing the oven's temperature control system?

Accepted Answer

The technician must verify and document that the oven achieves and maintains the required CCP temperature accurately, as a calibration error directly compromises the critical limit

Answer

When servicing equipment identified as a CCP in a HACCP plan, the technician's calibration verification directly affects food safety. If the oven reads 165°F but actually delivers 150°F, poultry is undercooked and pathogen destruction is not achieved. Technicians must verify calibration accuracy and document it so HACCP records remain valid.

Question 5

What does the term 'temperature danger zone' mean in a food service context, and why is it directly relevant to a food equipment service technician?

Accepted Answer

41°F–135°F (5°C–57°C): the range in which most pathogenic bacteria multiply rapidly; technicians must ensure all holding, cooking, and refrigeration equipment keeps food outside this range

Answer

The danger zone (41°F–135°F per FDA Food Code) is the temperature range where pathogenic bacteria like Salmonella, E. coli, and Listeria double rapidly. Every category of food service equipment — refrigerators, hot-holders, steam tables, cooking equipment — is engineered to keep food either below or above this range. A technician who returns a unit to service without verifying proper temperature may inadvertently enable dangerous bacterial growth.

CFESA - Commercial Food Equipment Service Association Practice Test

CFESA - Commercial Food Equipment Service Association Practice Test

CFESA HACCP Principles and Food Safety Compliance for Equipment