CCHT Dialysis Equipment Operation 2

Question 1

What does the conductivity monitor on a hemodialysis machine measure, and why is it critical?

Accepted Answer

Concentration of electrolytes in the dialysate solution

Answer

Conductivity measures the total ionic concentration (electrolyte content) of the dialysate, ensuring the correct concentration for safe treatment.

Question 2

During hemodialysis, the blood pump suddenly stops and the venous pressure alarm activates. What is the most likely cause?

Accepted Answer

Clotting in the venous needle or access

Answer

A sudden increase in venous pressure with blood pump stoppage typically indicates a clot or obstruction in the venous return pathway.

Question 3

What is the purpose of the deaeration chamber system in a hemodialysis machine?

Accepted Answer

Remove dissolved gases from dialysate before patient contact

Answer

The deaeration system removes dissolved gases (primarily CO2 and O2) from dialysate to prevent microbubble formation that could damage the dialyzer membrane.

Question 4

Which parameter must be verified before connecting a patient to the hemodialysis machine?

Accepted Answer

Blood flow rate, dialysate flow rate, temperature, and conductivity

Answer

All dialysis prescription parameters must be verified against the patient's prescription before treatment begins.

Question 5

What action should a technician take if the air detector alarm activates during hemodialysis?

Accepted Answer

Clamp the venous line and stop the blood pump immediately

Answer

An air detector alarm requires immediate clamping of the venous blood line and stopping the blood pump to prevent air embolism.

CCHT - Certified Clinical Hemodialysis Technician Practice Test

CCHT - Certified Clinical Hemodialysis Technician Practice Test

CCHT Dialysis Equipment Operation 2