AMT FAA Rules, Safety Procedures & Documentation 2

Question 1

Under 14 CFR Part 43, who is authorized to approve an aircraft for return to service after a 100-hour inspection?

Accepted Answer

A certificated repairman with appropriate rating

Answer

A certificated repairman with the appropriate rating, or an A&P mechanic, may approve an aircraft for return to service after a 100-hour inspection.

Question 2

What is the maximum interval allowed between 100-hour inspections when ferrying an aircraft to a maintenance facility?

Accepted Answer

10 hours

Answer

An aircraft may exceed the 100-hour limit by no more than 10 hours when ferrying to a maintenance facility, but the next 100-hour interval is calculated from the missed limit.

Question 3

Which FAA document defines the airworthiness standards for normal category airplanes?

Accepted Answer

14 CFR Part 23

Answer

14 CFR Part 23 establishes the airworthiness standards for normal, utility, acrobatic, and commuter category airplanes.

Question 4

An AMT discovers a major repair is needed on an aircraft. Which form must be used to report the repair?

Accepted Answer

FAA Form 337

Answer

FAA Form 337 (Major Repair and Alteration) must be completed for all major repairs and major alterations to aircraft.

Question 5

Which regulation requires that maintenance records include the date, description of work, and signature of the person performing the work?

Accepted Answer

14 CFR Part 43.9

Answer

14 CFR Part 43.9 specifies the content requirements for maintenance records, including date, description, and signature with certificate number.

(AMT) Aviation Maintenance Technician Practice Test

(AMT) Aviation Maintenance Technician Practice Test

AMT FAA Rules, Safety Procedures & Documentation 2