AMT FAA Regulations and Publications 2

Question 1

Under 14 CFR Part 43, which maintenance record entry is required after an annual inspection?

Accepted Answer

Date, signature, certificate number, and a statement of airworthiness or return to service

Answer

Part 43.11 requires the date, signature, certificate number, and a signed statement that the aircraft is airworthy or a list of defects preventing airworthiness.

Question 2

Which FAA publication provides the minimum performance standards for aviation fuel system components?

Accepted Answer

Technical Standard Orders (TSOs)

Answer

Technical Standard Orders (TSOs) establish minimum performance standards for specified aviation components and materials.

Question 3

An AMT discovers a cracked engine mount bracket that is not covered by an existing AD. What regulation governs whether this defect must be reported?

Accepted Answer

14 CFR Part 43.13

Answer

Part 43.13 requires maintenance be performed using methods, techniques, and practices that restore the aircraft to its original condition, and defects affecting airworthiness must be addressed.

Question 4

Which document must an FAA-certificated repair station issue when returning an article to service after maintenance?

Accepted Answer

FAA Form 8130-3

Answer

FAA Form 8130-3 (Airworthiness Approval Tag) is issued by repair stations as an approved return-to-service document for repaired or altered articles.

Question 5

Under 14 CFR Part 65, an A&P mechanic certificate with Inspection Authorization (IA) may be issued only to mechanics who have been active for at least how long?

Accepted Answer

3 years

Answer

Part 65.91 requires that an IA applicant have held a valid A&P certificate for at least 3 years.

(AMT) Aviation Maintenance Technician Practice Test

(AMT) Aviation Maintenance Technician Practice Test

AMT FAA Regulations and Publications 2