OSHA OSHA - Safety Certificate Walking and Working Surfaces Questions and Answers 3

Question 1

Which OSHA standard specifically addresses the requirements for walking-working surfaces in general industry?

Accepted Answer

29 CFR 1910 Subpart D

Answer

Subpart D of 29 CFR 1910 covers walking-working surfaces for general industry workplaces.

Question 2

What is the employer's responsibility regarding drainage on walking-working surfaces where wet processes are used?

Accepted Answer

Drainage must be maintained or dry standing places must be provided

Answer

OSHA requires drainage or dry standing places where wet processes are used per 29 CFR 1910.22(a)(2).

Question 3

When must guardrail systems be installed on walking-working surfaces?

Accepted Answer

On any open-sided surface 4 feet or more above a lower level

Answer

Guardrails are required on unprotected sides and edges of walking-working surfaces 4 feet or more above a lower level.

Question 4

What is the minimum height requirement for a standard guardrail top rail under OSHA general industry standards?

Accepted Answer

42 inches

Answer

OSHA requires top rails to be 42 inches plus or minus 3 inches above the walking-working surface per 29 CFR 1910.29.

Question 5

Which of the following conditions would constitute a violation of OSHA walking-working surface standards?

Accepted Answer

Allowing tools and materials to accumulate on a stairway passage

Answer

Accumulation of tools and materials on stairways creates tripping hazards and violates housekeeping requirements.

OSHA Safety Certificate Practice Test