← All OSHA Flashcard Decks

Technical Measurements Flashcards

7 cards from real OSHA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Technical Measurements flashcards as text
  1. A solid steel billet has a volume of 2 cubic feet. Using 490 lb per cubic foot, what is its approximate weight?

    Answer: 980 lb

    2 ft³ × 490 lb/ft³ = 980 lb.

  2. A concrete block measures 4 ft × 3 ft × 2 ft. Using 150 lb per cubic foot, what does it weigh?

    Answer: 3,600 lb

    4 × 3 × 2 = 24 ft³, and 24 × 150 lb = 3,600 lb.

  3. Approximately how much does 1,000 gallons of water weigh?

    Answer: 8,340 lb

    Water weighs about 8.34 lb per gallon, so 1,000 gallons is about 8,340 lb.

  4. How many pounds are in one metric tonne?

    Answer: 2,204.6 lb

    One metric tonne equals 1,000 kg, which is about 2,204.6 lb.

  5. On a crane load chart, the load radius is measured from where to where?

    Answer: From the center of rotation to the center of the hook or load

    Load radius is the horizontal distance from the crane's axis of rotation to the center of the suspended load's vertical hoist line.

  6. If boom length stays the same and the operator lowers the boom angle, what happens?

    Answer: Radius increases and capacity decreases

    Lowering the boom moves the hook farther out, increasing the radius and reducing rated capacity.

  7. Ignoring boom foot offset, what is the approximate radius of a 100 ft boom at a 60° boom angle?

    Answer: 50 ft

    Radius ≈ boom length × cos(60°) = 100 × 0.5 = 50 ft.

Written and edited by , founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. osha.gov — Score validity · verified Nov 2026
  2. nccco.org — Test delivery, renewal, score release, eligibility, fees, exam format, time limit, score validity · verified Nov 2026